1 / 5
Chiave per filtro acqua / Water filter wrench — zdjęcie 1
1 / 5

Chiave per filtro acqua / Water filter wrench

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I was late in changing the filter and I was no longer able to unscrew it by hand... No problem, I took the…

Ocena
0 / 5
Polubienia
1
Pobrania
35
Wydruki
0
Wyświetlenia
164
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

I was late in changing the filter and I was no longer able to unscrew it by hand... No problem, I took the measurements, drew the piece and launched the print, and after a little over 3 hours I had the wrench in my hand and changed the filter!!! Magical 3D printing!!! 😍😍

Ah, 60 cents... 😃😃

Obviously before deciding to create one I searched online, but these filters are all different and I didn't find one that was right... 😤😤

The filter model for which I designed it can be found in the photos; it consists of 12 notches spaced 30mm apart and a connection diameter of 110mm (among other things, often, there are no valid indications of the dimensions to understand if it is right for your case... 🙄🙄)

Video

I hope it is useful to you!

If you found it useful and if you want, you can offer me a coffee!, it will be an extra motivation to continue designing.

Happy printing!

(quickly translated with Google Translate 😅)

 

Ho tardato a cambiare il filtro e non sono più riuscito a svitarlo a mano... Nessun problema, ho preso le misure, disegnato il pezzo e lanciato la stampa, e dopo poco più di 3 ore avevo la chiave in mano e cambiato il filtro!!! Magica stampa 3D!!! 😍😍

Ah, 60 centesimi... 😃😃

Ovviamente prima di decidere di crearne una ho cercato in rete, ma questi filtri sono tutti diversi e non ne ho trovato una che andasse bene... 😤😤

Il modello di filtro per cui l'ho disegnata lo trovate tra le foto; è costituito da 12 tacche spaziate 30mm ed un diametro di aggancio di 110mm (tra l'altro, spesso, non ci indicazioni valide delle quote per capire se fa al proprio caso... 🙄🙄)

Video

Spero che ti sia utile!

Se l'hai trovata utile e se vuoi, puoi offrirmi un caffè!, sarà una motivazione in più per continuare a progettare.

Buona stampa!

Category: Tools

Tagi