Corne v4 Case (Wired 3×5)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom case for the Corne v4/4.1 keyboard (wired 3×5 layout), inspired by VOID’s wireless v3 design.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 648
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom case designed specifically for the v4/4.1 wired Corne keyboard in the 3×5 key layout. It assumes you’ll be using two OLED displays in place of the additional two outer keys supported by this Corne variant. If you're building a full 3×6 layout, this case will not be compatible without modification.
The design takes aesthetic inspiration from VOID’s case for the v2/v3 wireless Corne, but has been entirely rebuilt from scratch to accommodate the v4.1 PCB, which introduces several dimensional changes and mounting differences that render VOID’s original design incompatible.
The case is clean and minimalist, with geometry tailored to the latest Corne revision and optimized for standard 1.6 mm FR4 switch/diode plates.
Bill of Materials
(8) M2 × 4 mm countersunk screws
(8) M2 × 5 mm button head screws
(8) M2 × 8 mm female-female standoffs
→ Designed for 1.6 mm plates. For thicker plates (e.g., 3 mm acrylic), subtract the plate thickness difference from the standoff length (e.g., use 6.5 mm standoffs for 3 mm plates).
(8) 7 × 2 mm silicone feet