Nikko Evolution & Nikko Super Evolution -- Body Mount Posts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the body mounts on the Evolution (1:14) and Super Evolution (1:10) using standard metal clips.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
These are printable replacements for the body mount posts on the Nikko Evolution and Nikko Super Evolution, the 1:14 and 1:10 scale vehicles respectively in the Evolution lineup. There are two lengths of post I'm aware of, usually with the longer of which in the rear.
I designed them to match the fitment of the original parts, initially including the plastic body clips, but realized that using standard metal body clips would be more useful for longevity.
Upon recent revelation, I've realized the same part is used on the Super Evolution (1:10).
Printing
I recommend printing these with PETG, with a layerheight l ≤ 0.2mm. I print these with a 0.4mm nozzle. The clip hole should be normal to the bed when printing.
Post print
After printing, the posts should be ready for use, though cleaning up the clip hole with a 1.5mm diameter drill bit should improve the part.