P
PrintablesKj_temmes
Marimekko Unikko cookie cutter
Famous finnish Marimekko Unikko cookie cutters 3 kind cutters. you can scale how you like but increase Z height if you make it smaller than 100mm wide..
- Pobrania
- 699
- Polubienia
- 16
- Ocena
- 4
Wyniki wyszukiwania: nikko
Liczymy pasujące modele…
P
PrintablesNiko
Flower earring "unikko"
Earrings made in the shape of the Unikko flower by Marimekko. 'Unikko' is the property of Marimekko, and I don't own the rights to it. The model prints fine both ways and does not need supports. Just add some earring hooks to the holes…
- Pobrania
- 256
- Polubienia
- 11
- Ocena
- 5
P
PrintablesZedic
Nikko F10 Frame Buggy Tire Rhino Bison Thunder Bolt Super Lobo II Golden Arrow
Nikko F10 Frame Buggy Rear Tires. These fit 1/10 Scale Buggies like the Nikko Rhino Bison Thunder Bolt, Sears Super Lobo II, Radio Shack Golden Arrow, etc. Fit Wheel / Rim size: 50mm Diameter x 35mm Wide The tire is about 85mm Total…
- Pobrania
- 233
- Polubienia
- 13
- Ocena
- 0
P
PrintablesRazi Berg
Shaped Bokeh Kit - Nikon AF-S NIKKOR 50mm f/1.8G
Bokeh is the way the lens renders out-of-focus points of light, this is reflected in the shape of point sources of light in the background of photos. The bokeh shape is determined by the shape of the shutter, which means you can alter it…
- Pobrania
- 217
- Polubienia
- 33
- Ocena
- 5
P
PrintablesZedic
Nikko Transmission 1/10 Frame Buggy Rhino Bison F10 Golden Arrow
This is a custom design! It is meant to replace the original using the original hardware. It should fit, but it is different than the original. It is thicker, and should be a better 3D Printed part than if I had tried to make an exact…
- Pobrania
- 154
- Polubienia
- 14
- Ocena
- 0
P
PrintablesBlock1543
Nikon HB-37 lens hoods (Fits AF-S DX Nikkor 55-200mm ED VR)
Lens hoods for AF-S DX Nikkor 55-200mm ED VR lenses. These are reversible like the HB-37 lens hood from Nikon. Supports are needed to make the reverse hood mount print properly. .STL and .STEP files included.
- Pobrania
- 149
- Polubienia
- 11
- Ocena
- 5
P
PrintablesZedic
Nikko Lobo Black Fox 1/14 Buggy Tires
Nikko Lobo / Black Fox Front & Rear Tires I made these for my smaller 1/14 Nikko Lobo Frame Buggy. I think they will also fit Nikko Black Fox, Sears Lobo, Nikko Mosquito, and Tandy / Radio Shack Turbo Off-Road Frame Buggy. FYI: I was told…
- Pobrania
- 137
- Polubienia
- 9
- Ocena
- 5
P
PrintablesPrism8713
Nikon AF-S Nikkor 300mm f/4 D IF-ED Bahtinov mask
Bahtinov mask designed to fit over the original, integrated lens hood on the Nikon AF-S Nikkor 300mm f/4. Tri-Bahtinov generated using the webapp generator from Satakagi . https://satakagi.github.io/tribahtinovWebApps/Bahtinov.html
- Pobrania
- 130
- Polubienia
- 18
- Ocena
- 0
P
PrintablesJordverm
Nikon j1 nikkor 10-30 lens repair
My nikon j1 camera was dropped and the connection between lens and camera was broken. After 4 prints I got the tolerances correct and the print fits perfectly. Only there is still some cleaning work to do to remove the supports. Print…
- Pobrania
- 104
- Polubienia
- 7
- Ocena
- 5
P
PrintablesZedic
Nikko R/C Transmission Mount F10 Frame Buggy Rhino Bison Golden Arrow Super Lobo
NIKKO R/C Transmission Mounts. Fits various Nikko Frame Buggies. This is the part that holds the Transmission to the Chassis. Fits various NIKKO and Radio Shack R/C 1/10 Scale Buggies. Fits F10, Rhino, Bison, Dictator, Golden Arrow, Sears…
- Pobrania
- 90
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDani it Yourself
Back Cover for Remote control 9v battery Nikko
I designed the cover of the Nikko 9V remote control like the original model. You need to print with supports to have the side with the writing “OPEN” clearly visible on the top. Pla or pet-g filament with 0.15 layers.
- Pobrania
- 90
- Polubienia
- 5
- Ocena
- 0
P
PrintablesZedic
Nikko R/C Frame Buggy Light Pods K/C Rhino Bison 1/10
Nikko R/C Frame Buggy Light Pods 1/10 Size Nikko R/C Frame Buggy K/C Daylighter Fog Lamps Light Pods. Should fit lots of different 1/10 scale Nikko R/C Buggies. I also made some smaller ones for the 1/12 scale buggies. See my other…
- Pobrania
- 76
- Polubienia
- 9
- Ocena
- 0
P
PrintablesZedic
Nikko Frame Buggy Motor Mount Bracket F10 Rhino Bison Gold Arrow 1/10
NIKKO R/C Motor Mounting Bracket. Fits various Nikko Frame Buggies. This is the a bracket that holds the motor on the transmission on lots of different NIKKO and Radio Shack R/C vehicles. I think it fits F10, Rhino, Bison, Golden Arrow,…
- Pobrania
- 76
- Polubienia
- 7
- Ocena
- 0
P
Printablesfuzzysoul
Nikkor-style lens hood for Fuji Instax Mini 12
Is it ridiculous? Yes. But so is the glare on this camera. Don't be like me. Print this in a matte black PLA, or, better yet, use PETG to add rigidity.
- Pobrania
- 65
- Polubienia
- 35
- Ocena
- 5
P
PrintablesZedic
Nikko R/C Frame Buggy Battery Cover Door F10 Bison Rhino
NIKKO R/C Battery cover. Fits various Nikko Frame Buggies. Thi is the battery door that goes on the bottom of the NIKKO and Radio Shack R/C vehicles. I think it fits F10, Rhino, Bison, Dictator etc.. Sorry, I didn't test it. Let me know…
- Pobrania
- 61
- Polubienia
- 6
- Ocena
- 0
P
PrintablesZedic
Nikko R/C Turbo Panther Small Fog Lights
Nikko R/C Frame Buggy Light Pods for the Smaller size buggies Nikko R/C Frame Buggy K/C Daylighter Fog Lamps Light Pods. Should fit lots of different smaller scale Nikko R/C Buggies like the Turbo Panther. I also made some larger ones for…
- Pobrania
- 59
- Polubienia
- 10
- Ocena
- 0
P
PrintablesJL O
Scope Parallax 120 NIKKO STIRLING DIAMOND 10-40X56 rueda paralaje
Torreta paralaje para nikko stirling diamond 10-40x56, recomiendo imprimir en abs o materiales que aguanten bien la temperatura. Necesario un tornillo de metrica 3 y su turca correspondiente.…
- Pobrania
- 59
- Polubienia
- 2
- Ocena
- 0
P
PrintablesZedic
Nikko Frame Buggy Motor Cover F10 Rhino Bison Gold Arrow 1/10
NIKKO R/C Motor Cover. Fits various Nikko Frame Buggies. This is the cover that holds the motor on the transmission on lots of different NIKKO and Radio Shack R/C vehicles. I think it fits F10, Rhino, Bison, Golden Arrow, etc.. Sorry, I…
- Pobrania
- 55
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPanas P
Big Nikko Parallax Wheel
A parallax wheel for field target use. For use on a scopes with 42mm parallax knob (Nikko Stirling Diamond). For the bolt join use an M3 hex screw and bolt Category: Sport & Outdoors
- Pobrania
- 55
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPanas P
Nikko Stirling Diamond Scope Parallax Wheel
A parallax wheel for field target use. For use on Nikko Stirling Diamond scopes. Diameter range is min 80mm goes to 120mm and max at 200mm. Use M3 hex screw and nut to secure it. Print Settings Rafts: No Supports: No Resolution: 0.1 mm…
- Pobrania
- 53
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNKTechnical
48mm Hood for W-Nikkor 3.5cm f/1.8 Nikon S Rangefinder Lens
Information This is a lens hood for the W-Nikkor 3.5cm f/1.8 rangefinder lens (in Nikon S mount). It should also fit on the rare third version of the 3.5cm f/2.5. It uses a M48 X 0.5 filter thread. "Why does it have all those holes?" On…
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 0
P
PrintablesPanas P
Nikko Stirling Diamond Resettable Turret
A resettable turret for the Nikko Stirling Diamond (Big Nikko) with 72 clicks. You can easily reset zero by using just one hex screw. M4 hex screw and bolt. You will find attached the sticker in PDF and SVG format You can get this printed…
- Pobrania
- 47
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNKTechnical
43mm Hood for W-Nikkor 3.5cm f/2.5 and f/3.5 Nikon Rangefinder Lens
This is a lens hood for the following Nikon Rangefinder lenses: W-Nikkor 3.5cm f/2.5 (first and second versions) W-Nikkor 3.5cm f/3.5 (second and third versions) The thread is 43mm x 0.5mm pitch, which matches Nikkor lenses from this era.…
- Pobrania
- 46
- Polubienia
- 5
- Ocena
- 0
P
PrintablesZedic
Chassis Brace Nikko F10 Rhino Bison Super Lobo 1/10
Nikko F10 R/C Buggy Chassis Brace **Want More Free Designs? Like and comment. Knowing people are using my designs keeps me motivated to make you. Thanks! I'm releasing these files under the Creative Commons…
- Pobrania
- 46
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDusBus
Lens hood HB-N103 Nikon 1 Nikkor 30-110
The original lens hood was like 20 bucks, so I made my own. Depending on your printer, you may have to carefully file down the tiny plastic tab a little bit so that it snaps in more easily. Since I couldn't find accurate dimensions of the…
- Pobrania
- 45
- Polubienia
- 0
- Ocena
- 0
P
PrintablesElegantBeef
Nikon Af Nikkor 70-300mm lens cap
A basic lens cap for the 70-300mm lens that uses the lens hood attachment to attach to the lens
- Pobrania
- 44
- Polubienia
- 4
- Ocena
- 0
P
PrintablesVaughan
Lens hood for the El Nikkor (N) 50mm Enlarger Lens
Lens hood for the El Nikkor Enlarger 50mm Lens
- Pobrania
- 43
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDuckinmyhat
Nikkor 50mm f1.4 ai conversion
This works on the Nikkor-sc auto 50mm f1.4 shown, I believe there are different versions, and this won't work on all of them. I uploaded 2 versions, one with and one without the pattern to add more grip.
- Pobrania
- 38
- Polubienia
- 3
- Ocena
- 5
P
PrintablesLuca Vascon
- The CAPelot - 10.5mm Fisheye Nikkor cap for removed hood (FX modified lens)
10.5mm Fisheye Nikkor cap for removed hood-FX modified lens 10.5mm f2.8 Fish Eye Nikkor is one of the most used lenses for taking 360 VR panoramas in a few shots. Especially when using FX sensor cameras. In this case, you have to remove…
- Pobrania
- 36
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNils
Tracks for Nikko Fight Dragon
Tracks for Nikko Fight Dragon. Printed with Elegoo Neptune 4 Pro, sliced with Cura Ultimaker, used the default settings with Generic → TPU 95A. Your Setting may variant. They fit - as you can see - but are not perfekt. I designed them by…
- Pobrania
- 33
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPanas P
Nikko Stirling Diamond Original Parallax Wheel Extension
This is an extension for the original parallax wheel for the Big Nikko.It comes in two sizes 125mm and 130mm diameter. With teeth or without. It is press fitted around the original parallax wheel. Print Settings Rafts: No Supports: No…
- Pobrania
- 32
- Polubienia
- 0
- Ocena
- 0
P
Printablesblechbude
Nikon W-Nikkor 1:1.8, f=3.5 cm Gegenlichtblende lens hood Weitwinkel Wideangle Rangefinder Messsucher
Gegenlichtblende für das Nikkor W-Nikkor 1:1,8 f=3.5 cm Weitwinkelobjektiv für die Meßsucherkamera. Da ich dieses Objektiv - leider - nicht selbst besitze wurde das Modell mit geduldiger Hilfe anderer Personen, welche mir die Abmessungen…
- Pobrania
- 30
- Polubienia
- 5
- Ocena
- 0
P
PrintablesRyanGuy
Nikon AF-S FX NIKKOR 24-70mm Universal Lens Cap
My main lens' cap is always falling off in my camera bag. This over the top style cap works far better. If you can get TPU to play nice, that is going to be your best bet. It also works with PETG and PLA, but you will want to size up the…
- Pobrania
- 29
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPanas P
Oversized Turret for Nikko Stirling Diamond
This an oversized turret for the Nikko Stirling Diamond. It is designed to be press fitted over the factory one and secured by three longer set screws. You can get this printed with high quality petg/carbon filament from here :…
- Pobrania
- 28
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSpruceBruce
M65 Mount for Nikon Nikkor 90mm f8 SW
I created this M65 mount that gives you the proper flange distance for fixed infinity focus for the Nikkor 90mm.
- Pobrania
- 27
- Polubienia
- 9
- Ocena
- 0
P
PrintablesMartin Vavro
Lidl drill press adapter to Nikkor 55mm f3.5 macro lens for DSLR film scan
Used for film scans.
- Pobrania
- 26
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMammaTaz
Nikko Stirling turret cap Mount Master 4x32
Turret caps for a Nikko Stirling Mount Master 25.4mm x 10mm unthreaded
- Pobrania
- 25
- Polubienia
- 0
- Ocena
- 0
P
Printablesわかめ もじゃろ
canon EF - nikkor M39 helicoid adapter
As it is a basic design for verification, there is a risk of the lens falling off while focusing. Please use it carefully.
- Pobrania
- 23
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSocialmocracy
Nikkor W 100mm to Canon EOS EF
Here is number two. I wasn't going to make a 100mm adapter. I was hoping to make a 65mm a 90mm and then a 180mm to round it off. But here we are. It's also funny to see a Nikon Lens on a Canon body. Let's talk about why, now that I have…
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSocialmocracy
Nikkor SW 65mm f4 to Canon EOS EF
Number 4!!! This was not something I even figured I would make. I just found out the Nikkor SW 65mm has a Flange distance of 70mm. So here we go it worked. It's funny to see a Nikon lens on a Canon body. I'm not 100% happy with this one…
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSocialmocracy
Nikkor W 180mm f5.6 to Canon EOS EF
Number 3!!! This was the lens I wanted to start with. My Nikkor W 180mm f5.6 Large format lens. This thing is used to cast an image for a 4x5 or 5x7 large format film camera!! It's funny to see a Nikon lens on a Canon body. Let's talk…
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFreizeittechnik
Nikko Evolution & Nikko Super Evolution -- Body Mount Posts
These are printable replacements for the body mount posts on the Nikko Evolution and Nikko Super Evolution, the 1:14 and 1:10 scale vehicles respectively in the Evolution lineup. There are two lengths of post I'm aware of, usually with…
- Pobrania
- 18
- Polubienia
- 5
- Ocena
- 0
P
Printablesléopold GUEVART
NIKKO RC CAR piece
small piece for nikko rc cars doen't need supports and normal settings.
- Pobrania
- 18
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSocialmocracy
El-Nikkor Slip-on Lens Hood
This may fit on other reversed enlarger lenses with m39 thread. However I only have El-Nikkor Enlarger lenses. Tested this on: El-Nikkor 40mm f4n El-Nikkor 50mm f2.8n El-Nikkor 63mm f2.8n El-Nikkor 75mm f4 El-Nikkor 80mm f5.6n El-Nikkor…
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
Printablesblechbude
Nikon Gegenlichtblende Nikkor 8,5cm f2 Messsucher; Lens hood Nikon 8,5cm f2 rangefinder; M48 x 0,5
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das 8,5cm f2 Nikkor für die Nikon Meßsucherkamera. Gewinde M48 x 0,5 Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden. Für…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
Printableskevman
Remixed to fit my Nikko RC Plymouth
I love the idea of putting hobby grade wheels on these cars so I remixed this to fit my Nikko Plymouth Superbird. The rear fits on to the existing 3.5M hex by friction and then the existing 4mm axle can be used to keep the wheel secure.…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
Printables@doegox
Nikko Barracuda X front damping rods
Replacement dampening rod for the Nikko Barracuda X ( http://www.toystate.com/our-toys/nikko/barracuda-x/ ) RC car as apparently the manufacturer doesn't propose replacement parts for its "cheap" models. I willingly increased the features…
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 0
P
PrintablesVegard Makes
Front suspension struts for Nikko R/C car
One of the front suspension struts of one of our son's Nikko RC cars broke, making is impossible to steer the car. Instead of throwing the car away, I designed a simple replacement strut based on the original strut. Verified to fit the…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 5
P
Printablesblechbude
Nikon Gegenlichtblende für Nikkor H 5cm f2 M39 LTM; lens hood
Gegenlichtblende für das Nikon Nikkor 5cm f2 M39 LTM Objektiv mit M40,5 x 0,5 mm Gewinde. Benötigt Stützmaterial. Den Teil mit dem Gewinde mit möglichst niedriger Layerhöhe drucken. .................... Lens hood for the Nikon Nikkor 5cm…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesIlya ilyxa Tyshchenko
Nikon Nikkor pre-AI 55 f3.5 aperture ring conversion
Checkout for ver 3, reduced design not just replicate internal structure of original aperture ring, replicate Nikon grooves as it is also (if you want to), less support (but still important to use on internal surfaces not visible anyway),…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBartBE
Nikko 160700 battery door replacement
My son managed to lose the battery door of his Nikko remote (item nr 160700), so I decided to design an print a new one. Print Settings Rafts: No Supports: Yes Resolution: 0.1mm Infill: 25% or less Notes: I printed this in this…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesNKTechnical
Nikon F Rear Lens Cap for Nikkor 2.1cm f/4 and Deep Fisheye Lenses
The W-Nikkor 2.1cm f/4 requires a special lens cap, and the original cap is hard to find and quite expensive. So I designed one for anyone to print out. I've made versions with the flash coupler mount of the original viewfinder as well as…
- Pobrania
- 11
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNiran van den Ende
2x2 Gridfinity 42mm Nikkor 28mm 2.8 with HN-2 lenshood bin
Recently I got the gridfinity fever and I started to create some bins for my photography drawer. This model uses a 2x2 grid (42mm standard gridfinity size) to create a nice little bin for a nikkor 28mm lens. I made sure it fits with the…
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNKTechnical
48mm Hood for Nikkor 8.5cm f/2 Nikon Rangefinder Lens
The Nikkor P 8.5cm f/2 is one of the lenses that put Nikon on the map, but it came about when filter sizes were less standardized. It's really hard to find 48mm-sized step up rings and filters, and the ones that exist today usually have a…
- Pobrania
- 10
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKaz0044
Nikkoseiki ultrasonic inhaler Nodo mist NK8020 stand
Nikkoseiki ultrasonic inhaler Nodo mist NK8020 stand. 日光精器 - 超音波吸入器 のどミスト NK8020(携帯加湿器)用スタンド。
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDrewDeeDoo
Nikon ZF 40mm f2 lens cover nikkor tpu
Nikon 40mm lens cover. Print in TPU. 26mm lens cover: https://www.printables.com/model/1432243-nikon-28mm-f28-protective-lens-cover Check out my Nikon ZF grip: https://www.printables.com/model/1424562-nikon-zf-camera-grip
- Pobrania
- 9
- Polubienia
- 4
- Ocena
- 0
P
PrintablesNKTechnical
34.5mm Hood for Micro Nikkor 5cm f/3.5 Nikon Rangefinder Lens
Another lens with an original lens hood that costs thousands of dollars due to its rarity. I made this model which is much smaller, and includes vent holes so you can see the whole frame through the viewfinder. I've designed it as a…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKilobyte1368
Ashnikko Strawberry Switchblade Earring/Charm
The print in the photos was printed using 0.08 layer height. I recommend adding the pauses right after each color height is printed, not exactly where the color changes, but rather right above it. The differences between v1 and v2 is as…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAiddy81
Nikko Turbo Panther - Servo Steering Mod + Spare Parts
Nikko Turbo Panther – Servo Steering Mod & Upgrades After finding my old Nikko Turbo Panther (form the 80'2) with a dead mainboard and motor, I took the opportunity to completely overhaul it. I upgraded the electronics with a new…
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
Printablese
Nikko Elite 1:14 RC Rally Car Suspension Stiffener
Insert this between the suspension spring of a Nikko Elite 1:14 RC car to stiffen the suspension. I’ve only used it on the Nikko Elite Ford Red Bull 1:14 rally car RC but it should work with other Nikko branded suspension too.
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printablesblechbude
Nikon Nikkor-S 1:1,4 f=5,8 cm Gegenlichtblende lend hood
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das Nikkor-S 5,8cm f1,4. Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden. Für den Teil mit dem Feingewinde die Layerhöhe…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
AF Nikkor 24 rim protector with 52mm filter thread v3
An AF Nikkor 24 rim protector with 52mm filter thread v3 for protecting the lens glass on this lens. On my lens the filter thread had sheered off leaving the convex part of glass lens exposed to scratches if placed glass downwards. Also I…
P
Printables
Nikon F Rear Lens Cap for Nikkor 2.1cm f/4 and Deep Fisheye Lenses
The W-Nikkor 2.1cm f/4 requires a special lens cap, and the original cap is hard to find and quite expensive. So I designed one for anyone to print out. I've made versions with the flash coupler mount of the original viewfinder as well as…
P
Printables
W-Nikkor 2.5cm f/4 Front Lens Cap
This is a simple twist-on lens cap for a rare vintage lens made by Nikon. I made a few versions, including a multicolor version (pictured) as well as a version with no logo. Let me know if you have any issues or questions, enjoy!
P
Printables
AF Nikkor 24 rim protector with 52mm filter thread v3
An AF Nikkor 24 rim protector with 52mm filter thread v3 for protecting the lens glass on this lens. On my lens the filter thread had sheered off leaving the convex part of glass lens exposed to scratches if placed glass downwards. Also I…
P
Printables
Unikko Christmas decoration
Marimekko Unikko inspired christmas tree decoration. 'Unikko' is the property of Marimekko, and I do not own the rights to it.
P
Printables
Nikko f10 Thunderbolt Rear Wheel Hub
February 10, 2025 Nikko F10 Thunderbolt Dune Buggy Rear Wheel Hub These files are provided as a courtesy without any stated or implied warranty. Use at your own risk. This is a 2 part hub for ease of assembly to a printed tire. Print out…
P
Printables
Nikko RC Technotoy Joystick
New Joystick for a 80s or 90s NIKKO RC from the Technotoy line as my two were broken. Designed in FreeCAD you can change it to your needs like a shorter Stick or add knurling and so on. Print Settings Printer Brand: Creality Printer:…
P
Printables
Hood for Nikkor 20/2,8 AiS + Cover
-Slip in hood, threadless, fit tightly. -Possible to lock in position with an extra M2x3mm screw and metal spacer on slot. -Print with fuzzy skin walls, no support needed. -Cap added.
P
Printables
Nikko Turbo Panther / Thunder Eagle Steering Arm Retention Clip
This is a steering arm linkage clip to replace a lost or damaged one from the vintage Nikko Turbo Panther, Thunder Panther, Thunder Eagle, Turbo Eagle etc. and similar cars. It's not intended to be an exact copy, instead to be a close…
P
Printables
Nikon AF-S Nikkor 300mm f/4 D IF-ED guide scope mount
Clamp to add a guide scope to a Nikon 300mm f4. Made to fit the ZWO Synta/Vixen style clamp (ZW-FS-II). The holes for the Vixen saddle is threaded for M4. Be careful not to overtighten the screws. These holes could be made stronger using…
P
Printables
W-Nikkor 2.5cm f/4 Front Lens Cap
This is a simple twist-on lens cap for a rare vintage lens made by Nikon. I made a few versions, including a multicolor version (pictured) as well as a version with no logo. Let me know if you have any issues or questions, enjoy!
P
Printables
Part 60 – Trailing Arm Pivot (Nikko Night Rage)
Replacement pivot for the rear trailing arm assembly. Compatible with Nikko 1/10 scale 4WD monster trucks from the 1980s-1990s.
P
Printables
58 Trailing Arm Support (Nikko Night Rage)
Replacement for the rear trailing arm support assembly. Compatible with Nikko 1/10 scale 4WD monster trucks from the 1980s-1990s.
P
Printables
Nikon AF-S NIKKOR 70-200mm f/2.8G ED VR Tripod Foot
Nikon AF-S NIKKOR 70-200mm f/2.8G ED VR1 Tripod Foot + Modular Arca-Swiss Mount Hey everyone! I recently bought a Nikon AF-S NIKKOR 70-200mm f/2.8G ED VR1, but it didn't come with a tripod foot, so I decided to design my own! The foot…
P
Printables
Nikkor 40mm SE Modular Lens Hood
Modular lens hood system designed for Nikon 40 MM SE lens. May fit other lenses with a 52mm thread. Theoretically compatible with 52mm filters, but I haven't tested. Mounting thread is a standard 55mm camera thread, any hood with 55mm…
P
Printables
Lens Cover for Nikkor 18-55mm
Remix of lens cover by balabas ( https://www.thingiverse.com/thing:782450 ) I did following main adjustments: enlarged to fit my lens size balabas's cover goes completely inside the edge of the lens and from my opinion there is risk of…
P
Printables
Nikko F10 Frame Buggy Rear Shocks
Nikko F10 Rear Shock bodies. Fit Rhino, Bison, Super Lobo II, etc. If you are missing springs, they are about 60mm Long 14 mm ID 16mm OD. You can find replacement springs this size. Look for other 1/10 shocks. Tamiya Blitzer Beetle rear…
P
Printables
Nikkor 20-35 f/2.8 D AF Focus Lock Ring
Replacement for the Nikkor 20-35 f/2.8 D AF broken lock ring. Requires M2.5 nut and 6mm screw (there is also an uncut version, which requires lens disassembly). Print with 0.4 (or smaller) nozzle.
P
Printables
Box For UW-Nikkor 15mm Lens (Nikonos 15mm Lens) Rev01
Please note there is an updated version of this Box. This is a storage/transport box for a UW-Nikkor 15mm Lens (Nikonos 15mm Lens) This project has two files. 1)The Box 2)The Lid They are supposed to be held together with (6mmx20mm)…
P
Printables
Gears for Nikko Razer
It's spare gears and bearings for the 6x6 nikko razer. Beware you may need some ajustement to make it fit correctly (that's why the solidworks files ares here too) Printed in PLA 100% it seems to be OK for now. Edit : i have made both PLA…
P
Printables
Box For UW-Nikkor 15mm Lens (Nikonos 15mm Lens) Rev02
This is a storage/transport box for a UW-Nikkor 15mm Lens (Nikonos 15mm Lens) This project has three files. The Box The Lid The Lid with Text They are supposed to be held together with (6mmx20mm) magnets. You will need 8 of them. The fit…
P
Printables
Box For UW-Nikkor 35mm Lens (Nikonos 35mm Lens)
This is a storage/transport box for a UW-Nikkor 35mm Lens (Nikonos 35mm Lens) This project has two files. The Box The Lid The Lid with Text They are supposed to be held together with (6mmx10mm) magnets. You will need 8 of them. The fit is…
P
Printables
Nikko Lobo 2 Front A-Arm 1:14 R/C Buggy
Nikko Lobo 2 ( Sears Lobo II 7.2v) Front Suspension Arms These are the Front A-Arms for the Sears Lobo II made by NIKKO. They fit other Nikko 1/14 Scale buggies that use the same chassis. PLA is fine for display or a quick run around the…
P
Printables
Blenda HB-32 for Nikkor
Photography accessorie. Blenda HB-32 for Nikkor. Two sided position.
P
Printables
Battery Cover for Nikko Remote Control #94150
Somehow I lost the battery cover of my Nikko Remote Control, so I sat down some minutes on Sketchup and made a replica. You will need to use supports to correctly print the little insert on the back and the screw hole. If you download…
P
Printables
Lens Hood Nikon F AF VR Zoom-Nikkor 80-400mm f/4.5-5.6D
Lens Hood Nikon F AF VR Zoom-Nikkor 80-400mm f/4.5-5.6D use fuzzy skin to beter look Category: Camera
P
Printables
Battery cover for older Nikko remote
Print with supports under the tab and file the bottom of the tab flat. Make sure the inner corner between the tab and the rest of the cover is clean.
P
Printables
battery cover for Nikko RC controller
battery cover for Sears/Nikko RC controller, lost the original. I'm not a designer so it's a little rough so please feel free to refine/improve on this design. I used black PLA. Normal temp settings. 20% infill with supports. Uses 10 g of…