1 / 1
Lens hood HB-N103 Nikon 1 Nikkor 30-110 — zdjęcie 1

Lens hood HB-N103 Nikon 1 Nikkor 30-110

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

1,65 € – 2,02 € netto (bez VAT)

Dla pliku: lenshood_nikon_1_30-110mm_v3_01mm_pla_mk3s_2h28.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,84 € netto (środek widełek).

Masa podana przez autora
10 g
Czas druku podany przez autora
2,46 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

The original lens hood was like 20 bucks, so I made my own.

Ocena
0 / 5
Polubienia
0
Pobrania
45
Wydruki
1
Wyświetlenia
412
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The original lens hood was like 20 bucks, so I made my own.

Depending on your printer, you may have to carefully file down the tiny plastic tab a little bit so that it snaps in more easily.

Since I couldn't find accurate dimensions of the original lens hood anywhere I had to eyeball some of them a little bit. It could probably be a few mm longer and still not cause any vignetting, but I played it safe and it gets the job done anyway.

I hope this helps someone saving some cash on overpriced Nikon accessories, to spend it on more filament for cool projects instead :)

Print instructions

Although not an issue for me on my MK3S+ the tiny extrusions on the first layer might cause you some trouble. In that case I recommend playing with "External perimeters first", that might do the trick.

Tagi