Nikkor 40mm SE Modular Lens Hood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lens Hood designed for 40mm Nikkor Lens Hood - Compatible with 52mm filters
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Modular lens hood system designed for Nikon 40 MM SE lens. May fit other lenses with a 52mm thread. Theoretically compatible with 52mm filters, but I haven't tested.
Mounting thread is a standard 55mm camera thread, any hood with 55mm internal thread should be mountable to the flange, if you desire to make a non radially symmetric hood for this system, you'll need to use the lockring in your design so you can align it properly.
Print Settings:
NOTE: If you are printing the square hood, it must be printed with the lock ring concentric on the plate. The lock ring cannot be manually inserted after printing.
Printed with 0.8MM layer height and 0.4 nozzle
Recommend scarf joints with random seam positioning for aesthetics