1 / 4
Nikko Turbo Panther - Servo Steering Mod + Spare Parts — zdjęcie 1
1 / 4

Nikko Turbo Panther - Servo Steering Mod + Spare Parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nikko Turbo Panther - Servo Steering Mod and some other parts

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
68
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Nikko Turbo Panther – Servo Steering Mod & Upgrades

After finding my old Nikko Turbo Panther (form the 80'2) with a dead mainboard and motor, I took the opportunity to completely overhaul it. I upgraded the electronics with a new ESC/controller and converted the standard steering over to a responsive servo setup and added som lights.

This file pack includes all the custom 3D-printed parts needed for the conversion, along with a few extra structural fixes and upgrades.

Included Parts:

  • Pinion Gear: Replacement gear for the motor assembly.

  • Servo Steering Conversion: All required parts to switch the front end to a servo setup, including a custom top cover. 

  • Light Bar Mount: A bracket to add custom lights (especially useful if your original RC frame is busted).

  • Power Switch Adapter: A secure mount to ensure the power switch from the new electronics fits solidly into the stock chassis location.

  • Rear Axle Retainer: The clip/part that keeps the rear axle locked securely in place.

Recommended Print Settings:

  • Nozzle Size: 0.4 mm

  • Layer Height: 0.2 mm

  • Material: PETG or ABS/ASA recommended for durability, though PLA works fine for the non-structural brackets.

Tagi