1 / 12
Multimeter FNIRSI DMT-99 And Lead Holder For Honeycomb Storage Wall — zdjęcie 1
1 / 12

Multimeter FNIRSI DMT-99 And Lead Holder For Honeycomb Storage Wall

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed for FNIRSI DMT-99 Multimeter but it probable could be used with other multimeters.

Ocena
0 / 5
Polubienia
11
Pobrania
98
Wydruki
1
Wyświetlenia
576
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

This design to be used with FNIRSI DMT-99 Multimeter. It could be used with other multimeters. Inside diameter for multimeter is roughly 75t x 79w x 28d mm. The lead holder is detachable from the main body by 3 magnets. They are roughly 30t x 10w x 3d mm. If you do use the magnets make sure the polarity is correct on them, so they attract and do not repel each other. 

Material - What ever you want.

Supports - Everywhere. 

Tagi