1 / 4
Lid Storage for Ello Duraglass 3.4 cup Food Storage Containers — zdjęcie 1
1 / 4

Lid Storage for Ello Duraglass 3.4 cup Food Storage Containers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Storage rack for "Ello Duraglass Glass Food Storage Meal Prep Containers - Glass Food Storage Meal Prep Bowls with…"

Ocena
0 / 5
Polubienia
17
Pobrania
60
Wydruki
0
Wyświetlenia
533
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

We have many "Ello Duraglass Glass Food Storage Meal Prep Containers - Glass Food Storage Meal Prep Bowls with Silicone Sleeve and Airtight Lids, 10 Piece 5 Pack, Fruit Salad, 3.4 Cups". The lids are about 0.5" thick plus locking tabs, slippery, don't stay stacked and kept falling, so I designed this rack.

Each rack holds 6 lids.

Holds lids on end with the bottom tab slightly folded and the top (when in the rack) folded flat to clear the drawer above.

I print this in PETG.

Print Settings

Printer Brand:  Bambulabs

Printer:   Bambu P1P

Rafts:  No

Supports:  No

Layer Height:  0.28mm

Nozzle:  0.6mm

Line Width:  0.8mm

Infill:  25%

Filament:  Any.  I like PETG.
 

Notes: 

Printed with wide lines (0.8mm with 0.4mm (now 0.6mm) nozzle) and layer height 0.28. Surface finish suffers a bit, however that's a low priority for me.

Large bottom surface tends to warp; I added inner / outer brims and adhesion aids (ovals) at the corners during slicing.

I printed at 240C, bed at 80C for adhesion (hot plastic is sticky), with blue tape to guarantee removability.

These have proven quite durable; reduced infill to 25%.

How I Designed This ===================

Design notes

Used calipers and OnShape; link:
https://cad.onshape.com/documents/296df6420a4792fa694d5487/w/ea4396fbeaa1090f320fbce1/e/38eda6046c77f98465029db6

Category: Organization

Tagi