1 / 4
Lid Storage for Ello Duraglass 3.4 cup Food Storage Containers — image 1
1 / 4

Lid Storage for Ello Duraglass 3.4 cup Food Storage Containers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Storage rack for "Ello Duraglass Glass Food Storage Meal Prep Containers - Glass Food Storage Meal Prep Bowls with…"

Rating
0 / 5
Likes
17
Downloads
60
Makes
0
Views
533
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

We have many "Ello Duraglass Glass Food Storage Meal Prep Containers - Glass Food Storage Meal Prep Bowls with Silicone Sleeve and Airtight Lids, 10 Piece 5 Pack, Fruit Salad, 3.4 Cups". The lids are about 0.5" thick plus locking tabs, slippery, don't stay stacked and kept falling, so I designed this rack.

Each rack holds 6 lids.

Holds lids on end with the bottom tab slightly folded and the top (when in the rack) folded flat to clear the drawer above.

I print this in PETG.

Print Settings

Printer Brand:  Bambulabs

Printer:   Bambu P1P

Rafts:  No

Supports:  No

Layer Height:  0.28mm

Nozzle:  0.6mm

Line Width:  0.8mm

Infill:  25%

Filament:  Any.  I like PETG.
 

Notes: 

Printed with wide lines (0.8mm with 0.4mm (now 0.6mm) nozzle) and layer height 0.28. Surface finish suffers a bit, however that's a low priority for me.

Large bottom surface tends to warp; I added inner / outer brims and adhesion aids (ovals) at the corners during slicing.

I printed at 240C, bed at 80C for adhesion (hot plastic is sticky), with blue tape to guarantee removability.

These have proven quite durable; reduced infill to 25%.

How I Designed This ===================

Design notes

Used calipers and OnShape; link:
https://cad.onshape.com/documents/296df6420a4792fa694d5487/w/ea4396fbeaa1090f320fbce1/e/38eda6046c77f98465029db6

Category: Organization

Tags