AR111/QR111 adaptor for MR16 lights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adaptor ring which I created to mount MR16 LED lights into an luminaire which would normally use AR111 lights
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 936
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adaptor ring which I created to mount MR16 LED lights into an luminaire which would normally use AR111 lights.
I my case I wanted to fit specific tunable-white LED spots from ConstaLED into an “Ronka” luminaire from Arcchio.
I printed them with the front-facing side on the printbed and supports on the printbed.
After printing sanded the fronts, primed and spray-painted them. Afterwards I added a matte clear finish.
Products I used were: (no specific preference, I just wanted to try the Edding products)
There are different versions which I iterated later to come closer to the look of the retrofit 230V LEDs that came with the luminaire.
The “with bevel” versions have a 45 degree chamfer on the front face to opitcally separate the front face from the retaining ring.