AR111/QR111 adaptor for MR16 lights
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adaptor ring which I created to mount MR16 LED lights into an luminaire which would normally use AR111 lights
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 96
- Makes
- 0
- Views
- 937
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is an adaptor ring which I created to mount MR16 LED lights into an luminaire which would normally use AR111 lights.
I my case I wanted to fit specific tunable-white LED spots from ConstaLED into an “Ronka” luminaire from Arcchio.
I printed them with the front-facing side on the printbed and supports on the printbed.
After printing sanded the fronts, primed and spray-painted them. Afterwards I added a matte clear finish.
Products I used were: (no specific preference, I just wanted to try the Edding products)
There are different versions which I iterated later to come closer to the look of the retrofit 230V LEDs that came with the luminaire.
The “with bevel” versions have a 45 degree chamfer on the front face to opitcally separate the front face from the retaining ring.