Case for SM57 with official pop filter/windscreen (A2WS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you regularly use an A2WS windscreen on your SM57, this case protects both without having to remove it for storage.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
While the pouch that comes with the Shure SM57 is more than enough to protect it (and much more importantly, anything it comes in contact with), the official A2WS windscreen/pop filter isn't nearly as robust. This case snaps on to protect the windscreen while it is installed on an SM57, particularly if you can't be bothered to remove it when not in use.
STL included in recommended print orientation; supports not required. Fusion 360 sources included in case the notches need to be adjusted for your printer.
Unfortunately, leaving the A2WS installed makes it much more difficult to use the SM57 as a hammer while setting up your gig.
Links above are affiliate links – though if you're looking to buy a microphone and your primary use case is live vocals, you might want an SM58 instead so you won't need to separately get the windscreen or print this case (and it will also be a marginally better hammer).