Dewalt Toughcase Pittsburg Quarter inch Deep Metric Socket Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed in TPU on my Ender 3, not sure if PLA will work, but you're welcome to try.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I frequently use my metric set of ¼" deep sockets and very much dislike the socket rail that Harbor Freight provides, so I made this after being gifted a small set of DeWalt ToughCases filled with driver bits and struck with inspiration.
I have this setup to be a friction fit for the metric set, so they hold in place when opening and closing the lid. included a couple wells to have somewhere to put small parts that were removed.
I printed this in TPU running at 30mm/s for speed with 25% gyroid infill.
I've also attached the positive model I made for the interior of the DeWalt ToughCase in case you want to make a different organizer. I'll be publishing it separately as well.