Simple Multirotor System for 10mm AND 1/2 inch booms AND pipes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple way to get a functional multirotor quite fast. You can make all sorts of configurations like: X or…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a simple way to get a functional multirotor quite fast. You can make all sorts of configurations like:
X or Plus
Hex
Octo
Tri
H-quad
Pick your favorit size and material booms or pipes and start building!
When the parts sandwich a boom or pipe there is a small gap. This is by desing so those who wants can wick in some glue.
This is always a work in progress! I have some H-quad hub parts that will be up soon.
If you want to make your own compatible parts measurements are:
Bottomplates and walls: 2 mm.
Holes: 3.1 mm.
And don't hesitate to ask if you have any questions, suggestions for improvments or requests. Have fun!
How I Designed This
Credit where credit is due
This project was inspired by Flitetests Knuckle H-quad.
( http://flitetest.com/articles/knuckle-h-quad )
It is essential to get the booms perpendicular when building of an H-quad. Since my printer is a lot more exact than me I wanted to use it's prowess to help me get it right.
When I started building multirotors I spent a lot of time on flitetest. For my first trys I loosley followed the H quad build video. ( http://flitetest.com/articles/H\_Quad )
But i wanted lighter and faster builds and thier knucke system caught my eye. My goal was to keep the simplicity of the Flitetest knuckle H-quad kit, expand it and also add a few configruations.
Category: R/C Vehicles