(Un)Original Drybox Temperature/Hygrometer Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple thermometer/hygrometer mount for the (Un)original Prusa Drybox.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I don't use the standard silica gel container locations because I find them very difficult to reach. I also chose not to print the parts that mount the hygrometer in the top of the box because I wanted those parts to have as much strength as possible. I found that I still wanted to be able to check the temperature and humidity in the drybox however, so I came up with this model that holds these standard round hygrometers from Amazon and sits in the original silica gel container locations.
There are two versions included:
- a solid, 1-piece version
- a 2 piece version that is much easier to print, but requires assembly.
- you will need 3 x M3x10 socket head cap screws to assemble the pieces.