Vacuum Clamp (fits Festool MFT)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple print suction clamp that requires compressor or vacuum pump to run
- Ocena
- 5 / 5
- Polubienia
- 297
- Pobrania
- 699
- Wydruki
- 0
- Wyświetlenia
- 6848
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Render preview:
Here's a quick video demo:
Assembly diagram for compressor setup
Assembly diagram for vacuum pump setup
BOM (with links)
- M3 x 10mm (x8) for attaching the top
- M3 x 22mm (x2) to attach the valve
- Male Thread Quick Release Connectors Coupler 1/4" BSP (depends on your setup)
- 6mm Tube to 1/4 BSPT Push Lock
- 1/4 Turn 6mm Pipe Fitting Coupler Valve (I designed the holes for this specific
- Air Compressor Hose Pipe (6mm OD)
- PC6-01 Pneumatic Connector
- Solid Foam Rubber Round at 8mm
- Vacuum generator (if you are using a compressor)
You can probably get a vacuum generator from aliexpress, but I already had a vac pump for this. In fact I was only missing 1 connector to build this.
foam rubber sample pic
This is the vacuum generator I used. It is the Festo VN with silencer and it is really solid !
https://www.thorite.co.uk/products/festo-vn-07-h-t2-pq1-vq1-rq1-vacuum-generator-526101-526101
This means you don't need a vacuum pump, but just any compressor. Easy.
Any questions just ask in comments !