Vacuum Clamp (fits Festool MFT)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
simple print suction clamp that requires compressor or vacuum pump to run
- Rating
- 5 / 5
- Likes
- 297
- Downloads
- 703
- Makes
- 0
- Views
- 6,871
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Render preview:
Here's a quick video demo:
Assembly diagram for compressor setup
Assembly diagram for vacuum pump setup
BOM (with links)
- M3 x 10mm (x8) for attaching the top
- M3 x 22mm (x2) to attach the valve
- Male Thread Quick Release Connectors Coupler 1/4" BSP (depends on your setup)
- 6mm Tube to 1/4 BSPT Push Lock
- 1/4 Turn 6mm Pipe Fitting Coupler Valve (I designed the holes for this specific
- Air Compressor Hose Pipe (6mm OD)
- PC6-01 Pneumatic Connector
- Solid Foam Rubber Round at 8mm
- Vacuum generator (if you are using a compressor)
You can probably get a vacuum generator from aliexpress, but I already had a vac pump for this. In fact I was only missing 1 connector to build this.
foam rubber sample pic
This is the vacuum generator I used. It is the Festo VN with silencer and it is really solid !
https://www.thorite.co.uk/products/festo-vn-07-h-t2-pq1-vq1-rq1-vacuum-generator-526101-526101
This means you don't need a vacuum pump, but just any compressor. Easy.
Any questions just ask in comments !