Counting matching models…
Suction bulbs for standard EKG/ECG machines' electrodes. I recommend using FLEX/TPU, printing with a 0.4mm nozzle, 0.20 layers hight, and 10% infill, depending on the hardness of the filament used (the examples were printed with Tinmorry…
Inspired by the suction cup holder by @AyyArr, made to print simpler. Does not require supports. The tag is held by friction (could be very tight fit - don't worry, it'll be fine). Printed with clear Prusament PETG. Used with 20mm suction…
HT-50 suction-slide-suction-pipe Slider ca.: 71x133x14 TPU 0.4mm Nozzle ca 1h ca.: 10m Filament no Supports 25% Infill Pipe ca.: 75x75x59 PETG 0.4mm Nozzle ca 3h ca.: 20m Filament Supports 90% Infill
This was designed to mount furrion vision s screen for RV backup camera. printed with PetG 6 wall loops and 59% infill. Must print with suction platform down on smooth bed.
An inspection mirror with a suction cup mount is a handy tool that attaches to smooth surfaces, allowing hands-free use. Its adjustable arm positions the round mirror for viewing hard-to-reach areas. Commonly used in aircraft maintenance,…
In addition to the window bird table , ive made this suction cup window hanger for hanging the regular bird feeders on, right in front of your window! Requires only 2 printed parts with no supports needed. The two parts just slot…
long time ago I bought a Mannesmann mini vise with suction base. I thought it was a good idea - long story short .. it wasn't. This tiny part converts the suction base to something that can be clamp to a table. Additional Hardware a…
Vacuum Bag Suction Ring – Air Removal Aid for Filament Storage This compact suction ring enhances vacuum seal performance for filament storage bags by stabilizing the air valve during extraction. Designed to fit snugly with standard valve…
Just slice and print. I've used PETG for better durability, and lightning fill to reduce the amount of filament. Nothing special, fits the cut itself + the arm + 2 accessories (not sure if they are oiriginally from the cup or not, since I…
fittings are M3 for mounting and 1/4 NPT for the suction/air fittings. The model should be printed with the arrow pointing upward and no support.
Venturi vacuum tip. For full model, visit https://cults3d.com/:2717687
Simple suction cup mount for mirror hang tags. Requires 1.2 inch diameter suction cup (link below) Design for hang tags with a hole diameter between 22.3 mm and 25 mm. Installation: spin the tag onto the mount similar to putting keys on a…
Suction cup for your kitchen/bathroom tiled walls or your glass surfaces. Also added a hook that goes on the suction cup. If you want to attach something else, I've also added a small hole in the suction cup's head so a small thread can…
Stick this strainer in the corner of your sink using a suction cup and easily separate liquid from solids. I don't know about puting food you are going to eat through here, do your own research on fdm plastics food safety. I use this to…
I use an electronic ParkLite parking disc daily in my service vehicle. The original adhesive pads are annoying when replacing windshields or changing batteries. SwapMate is a simple suction-cup holder that allows easy removal and reuse…
If you operate on an Ambulance and you have one of those OB WB units, you know how easy is to break the power connector and how pricey it is. This model replaces the power connector in the wall bracket and won't broken again because it…
Clean up your setup with this perfectly-fitted Air Stone Holder Suction Cup Clip, Keeps Stone In Place, Aquarium Or Reservoir Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File…
Clean up your setup with this perfectly-fitted Betta Fish Leaf Rest Hammock, Suction Cup Mount, Near Surface Resting Spot Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
Insta360 support said there is no replacement part for the arm. If it break you should throw away your old accessory, and buy a new one. They give you 30 dollars discount, but you must contribute to e-waste. The arm made using PM…
Suction cup handle These are the suction cups I used: https://www.amazon.de/dp/B0CDHJX4LR?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 ruthes thread inserts:…
Sponge holder made to be used with suction cup from IKEA ÖBONÄS. Printed from 2 parts which just snap together. Printed with PETG with 15% infill.
Compact wall-mounted sink organizer. Perfect for holding sponges or brushes,
This part replaces the Suction Port — part no. 14 in the user manual — of the Scheppach HD2P dust extraction system . Unlike the original clamp-on part, this version is secured with screws to provide a more stable and reliable fit. The…
This allows to screw a Suction cup with a M4 Screwterminal to other things. Either my insulating blanket as shown on the pictures, Or just use it as is, you can tie a rope to it. You will need: A suction cup with M4 thread. I used one of…
I designed this hide for my crested gecko, it attatches to glass with one large OOK suction cup from Walmart Used pla
No Supports Suction Cups used - 2.5inch https://www.amazon.com/gp/product/B07X8THYRJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
This shower shelf hangs in your bathroom with cheap suction cup hooks . It holds your soap bars and razors! There are multiple models available, depending on how many soap bars and razors you need. This print has helped me keep my soap…
Stop light from entering through the suction cups holding the window cover. Loved the insulated window covers we got from https://www.bus-ok.de/T4-Isotherm-Set-innen-Thermomatten-fuer-Fahrerkabine-91-98-Top-Qualitaet for our VW T4. But…
I know what you're thinking.. "is that a good idea?" I had the same reservation, which is why so many gussets on the tabs and why there are 3, but it's holding strong, no sign of the cups giving up their vacuum, for weeks now, so it's…
Very strong suction cup mount for the Starlink Mini (22lbs per suction cup). No screws required, secures directly into where the kickstand is. Overengineered for extra strength (if you love your Starlink and your car why not). Great for…
Starlink Mini Mount with Suction Cups – Experience the Freedom of Uninterrupted Connection Wherever You Are! With 3d8.se’s innovative Starlink Mini Window Mount, your satellite internet experience becomes easier and more seamless than…
A support for the X200 SSD (Kodak or Emtec) with suction cup to be attached on the laptop.
Auf der Unterseite habe ich, mit einem doppelseitigen Klebeband, einen Schaumstoff angebracht. Dadurch wird die Haftung durch den Unterdruck des Staubsaugers an rauen Wänden wesentlich verbessert. Material PLA Layerhöhe 0,2 mm Infill 20 %…
Teile 22 / 22B / 22C Material PLA Layerhöhe 0,2 mm Infill 10 % Support 5% Tree Teil 22A Material TPU95 Layerhöhe 0,2 mm Infill 100 % Support 0 TPU A95 von 3DJake Dieses Filament ist auch druckbar mit Bowden-Extruder. This filament is also…
The original bracket is broken. The bracket is clipped into the cover.
A base to hold plugs that come with a removable vibrating bullet. Fits set from Adam&Eve.com The model prints easily with no support. I printed at 1.2 layer height, with somewhere between 25 and 50 percent infill, and 5 solid layers on…
This version is significantly improved - position is set independently on the column, size (and filament) was reduced, nozzle is independent part (sometimes can be destroy by drill bit) Additional parts: threaded rod M8 - 85-88mm DIN912…
A towel hook with a tpu suction cup. To assembly it you need insert the suction cup to the puller and then add the case. Assembly Video: M3 20mm screw is also required. Important: The suction cup is printed with TPU 95A on a smooth build…
Many years ago I designed and released plans for a open-source seed cleaner made from wood, which turned out to be very popular & is now in use in many countries: https://www.realseeds.co.uk/seedcleaner.html This is an adaptor for the…
This is for a very specific issue I had. I have a Cobra SPX 7800BT radar detector and one of the suction cups for its window holder was damaged. I found replacements at Hobby Lobby with a great diameter, but couldn't be held by the…
Seasucker Classic Ski Rack Suction Cup Covers I printed with PETG 2-3 walls 0.6 nozzle at 0.2 layer height You can sink the model down so that the bottom layer is only 5 layers (1mm) if you want it to be a bit more flexible. The way it…
This works slightly better to hang a heavier object on - e.g. body scrubber in picture. I think the support is a little too thick for some cases, so if it doesn't work for you try thinning the “block” by another mm.
Maximize functionality without sacrificing style with this custom-designed 3D-printed stand for the VAVA 9-in-1 hub. Equipped with robust suction cups for secure attachment to smooth surfaces like the back of laptop monitors, this stand…
The adapter can be screwed to the circular saw with a m4 Screw. It fits to a standard vaccum cleaner hose (35/34mm cone). You will need a strip of sticky tape to make a tight seal. No supports needed, print it with the round opening…
I have a suction System that has a diameter of 94,6 mm. My machines have all different diameters and since I didn't want to buy some overpriced adapters I 3d printed them. There is one adapter with an angle. The system works great until…
STEP model included, so everybody can modify internal diameter acc. to their accessories. Wall thickness is 1.5mm so also PLA could be used, walls remain flexible. My prototype was made from PLA. Print settings: 0,4 mm nozzle; 0,2mm layer…
Perfect for a terrarium or simply to decorate your home, you only need two suction cups. The vase comes in two versions, one with a hole in the bottom and one without, both printable without supports as in the picture.
For all you splatoon suction bomb fans. P.S Print the 2nd one. Category: 3D Printing
Suction Cup Adapter for Gecko Run Knikkerbaan / Kugelbahn. Since the orginal idea is great but the gecko pads last ony for an hour when you are lucky……. Use Suction Cups with M4 thread: Amazon Link Material: PETG Fill: 15% Suports: None…
A remix I made of one of my models that was designed for a terrarium. You can use it to decorate your home, as a plant pot, as a holder or simply add a few hairs to skellington, use your imagination! You need two aquarium suction cups…
This is a replacement part for the GoPro suction cup mount lever. A hexagon socket screw DIN912 M4x40 and an M4 nut are required for installation. The sleeve is optional and does not have to be used.
Adapter for 38 ID suction hose (https://www.amazon.it/dp/B08H2DBZD3?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) to lowrider-cnc-v4 dust-shoe (https://www.printables.com/model/1033926-makita-701-tool-mount-and-dust-shoe-for-the-lowrid) Print…
A suction adapter fitting the Bosch PEX 300AE Orbital Sander, equipped with an osVACneo M32 Male connector.
remix of model for Ikea Tisken Hook added hook for the side desk panel and modification of tolerances for better fit. printed on side with organic supports to get better position for printing lines and to increase strength
I needed a holder for my Vacuboy in the cell culture. This holds the Pasteur pipette vertically onto the walls of the hood, away from my area when I do other work. I printed with PLA and 20% infill. It is also fine with bacilli…
Base guía para usar la ventosa escleral y poner o quitar los lentes de contacto
Clip-on pots suitable for clipping over dividers such as glass dividers up to 6mm thick. The pot also includes a recess for an optional suction cup, for example if used in motorhomes (RVs) or caravans. The pot is in two parts to allow for…
Clothes Hook Attachment with Suction Cups for Car (Designed for Polestar 4) Tired of struggling to find a place to hang your clothes in your Polestar 4? This custom 3D-printed clothes hook attachment is the perfect solution! Designed…
My Dirt Devil Vacuum blew a fan (suction) blade, so I modeled another one and it works way better. I should recommend printing in Carbon Fiber so it won't break (again).
This is a two piece soap dish I designed that uses two suction cups to attach it to any clean non-porous surface, such as a mirror or the walls of a shower / bathtub. The base has slots in it for draining and the tray has ridges to lift…
If you find my designs useful, please consider sending a tip Simple shower holder for most types of razors which can be attached to suction cups with a loop. PLA Plenty of infil to make the rod nice and strong (I went 100% as it hardly…
I added a suction cup mount for the camera, intending to use it as a time-lapse mount on my window. You'll need an M4 nut and a screwable suction cup with an M4 bolt. I got mine from the big A. The base of the suction cup measures about…
Stopper for the GE Aisys CS2 Anesthesia machine vacuum arm
Suction bulbs for standard EKG/ECG machines' electrodes. I recommend using FLEX/TPU, printing with a 0.4mm nozzle, 0.20 layers hight, and 10% infill, depending on the hardness of the filament used (the examples were printed with Tinmorry…
Po montáži na vodítko frézovacího stolu lze připojit hadici vysavače s vnějším průměrem 35 mm, např. Makita.
Got tired of trying to keep the hose off the floor and at hand when I'm working on a project. This lets me keep the hose handy as long as there is a horizontal surface to which I can attach the clamp. The clamp mount versions fit the…
A removable dust suction hood for the table saw BOSCH GTS 10 XC is suggested. A detailed description can be found within the download-files.
DIY Suction Bell: Homemade and super effective! This 3D printed suction cup made of flexible TPU A95 guarantees quick and clean removal of clogs. I welcome all feedback! I'm eager to see your finished models. Happy printing!
This is version 2 of the Qbert suction cup model. I originally made one based on model remixed so it would fit a 45mm suction cup (hangerspace)- My wife pointed out that I had that fancy XL so why can't Qbert have some colour? Now he…
EN: Next components (flexible hose) i used from model Bosch PBD 40 by ariskilic - Thingiverse update 13.03.2023: I reupload model of original flexibile elements here, because from Thingiverse disappeared. For fixing on drill you can use…
Onshape Project URL: https://cad.onshape.com/documents/a72caaa9468cfb1c1f8fcdd4/w/e099a04e25b7ec96936a03ef/e/cb81bed87c14383b0c171f0d?renderMode=0&uiState=675c6def03e03152a01c9942 how to print YOU NEED TO PRINT THIS ON A SMOOTH PRINT…
The Rohent suction cup shaft with the ball shaft broke within the 1st 10 minutes of me owning the device. I designed this for those who need a replacement, and don't want to spend the $$$. Infill: 15% - 30% Material: PETG/ABS works better…
This allows me to use some random suction cups I had on hand to stick the wireless sensors to the inside of a reptile enclosure. I doubt this will be a direct fit for many suction cups due to the wide variation of suction cup ends, but…
German: Absaug Einheit Habe eine Absaueinheit entworfen, die an Wänden oder Decken haftet, teilweise sogar an Außenwänden Schlauchgröße: Innen: 35mm Außen: 40mm Ich habe eine Bearbeitungdatei ebenso freigegeben English: Suction unit I…
EN: The offspring vehemently asked for a ring for a silicone suction cup with an 8mm fitting… Here it is - please think of your own use case, because I can't think of any. The ring has an inner diameter of 30 mm and an outer diameter of…
a handy suction tool . very easy to use. in places that are difficult to reach... for miele 35mm connection suction mouth 243mm outsite te tool
I found the model from DaHouzKat and thought I would modify it to add some extra hooks that are nicely spread out allowing me to hang my wetsuit gloves and wetsuit hood. Of course, this could be used for anything (assuming it isn't too…
Clean up your bathroom by mounting your wet brush to a mirror or glass surface! This easy print combined with a suction cup will allow you to mount a wet brush ¹ to the mirror, freeing up valuable counter real estate! Don't have this…
Einleitung Dieser Starlink Mini Magnethalter wurde designed, um an leicht unebenen Flächen angebracht werden zu können. Er bietet durch das Magnet-3-Bein optimalen Halt, zum Beispiel an Campern, Autos, und Caravans. Der Winkel der…
Very quick model made in TinkerCAD to connect the Festool CT Midi to a workbench with a suction “tube” at one end of the workbench. Makes it easier to clear dust after cuts. Sweep into tube with your own broom or part 2 of this model.…
Starlink Mini Suction Cup Mount for Car, Camper, or Caravan Windows This is a remix of the original Starlink Mini Suction Cup Mount, designed for improved practicality and usability. Key Features: Uses affordable suction cups designed for…
Mit diesem Adapter kann ein Saugschauch mit D50 Muffe (z.B. Festool) mit dem Absaugstutzen des Makita Dickenhobels verbunden werden. With this adapter, a suction hose D50 sleeve (e.g. Festool) can be connected to the suction nozzle of the…
The Juwel Bioflow Super is meant to be glued on the fish tank glass. I rather like to have them fixed with suction cups, so I created an adapter between the Bioflow-Super Filter and four Eheim Suction cups. What you need: Juwel Bioflow…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/gjOcop79BBV I made the shelf to protect Trader Joe's plants from the cat. The suction cups allow me to hang it on my bathroom mirror. These suction cups…
Simple but effective suction adapter. No cleaning up glazing tongs marks :) I glazed bisque fired pieces, no wax on the bottom. Works in a similar way as dent puller does for glazing. Just turn your hoover on and the cup attaches, then…
This was designed to be mounted to glass with three industrial suction cups. It had to be robust enough for 6+ G's acceleration, and rapidly stow-able, and take up as little space as possible. The base includes a cavity for a 4500 mAh 6S…
Replacement suction head for CharlyPro 1015 / Mécanumeric Made with Creality K2 max
The black rubber lip on the suction opening has unfortunately fallen off. This is a replacement cap that should be printed in TPU.
With this simple piece, you can mount your suction cup tools on a wall. Designed for a diameter of 120 mm. You can modify the Fusion file (or STEP file) to adjust the diameter or other dimensions.
I found the wrench that came with the leg was just too small for someone with large hands to use comfortably and almost impossible to use if you had dexterity issues. With this I extended the length of the wrench added some cutouts for…
It is made for 125 or 100 mm diameter pvc pipe. The mid part you can print it or laser cut as i did.
This is a print for a mount to hold a starlink standard size dish to the underside of a moonroof or sunroof with suction cups. The link for the suction cups used on amazon is listed below. No additional hardware is needed. The mount is a…
Inspired by the suction cup holder by @AyyArr, made to print simpler. Does not require supports. The tag is held by friction (could be very tight fit - don't worry, it'll be fine). Printed with clear Prusament PETG. Used with 20mm suction…
suction parts 1 and 2 are glued together for easier printing select connection part what you want, longer are better from TPU, short i was made from PLA , both have smaller and bigger cone varinats for different vaccum tube
This razor holder is low profile and incorporates a suction cup which can be purchased here: https://amzn.to/42D8xQp (affiliate link). The fit for the suction cup is pretty tight, I have been using needle nose pliers to squeeze and push…
