Modular Bottle Holder for Fridges with suction pads
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular solution to stack NRW 0,5L Beer-Bottles in your fridge.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 259
- Makes
- 2
- Views
- 1,694
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Bottle-Holder is for 0,5L NRW Beer-Bottles (check the pictures) with a diameter of ~70mm and a height of ~260mm. It's the type of bottle that's mainly used in Austria, Germany and Swiss.
It should stop them from rolling around inside your fridges. I also strongly recommend the suction pads, as they stop the Bottle-Holder from sliding around. :)
I made the files from scratch with Fusion360 but I have been inspired by Arne S.
(https://www.printables.com/de/model/210593-beer-bottle-holder-for-the-fridge-different-bottle)
----------------------------------------------------------------------------------------------------------------
If you want to help me out a bit and see some stuff I made, work in progress, or models before they will be here consider liking and following my Facebook page, thank you very much - it means a lot to me! :)
If I link something on Amazon, those are affiliate links. Doesn't cost you anything but helps me grab a cup of coffee from time to time - thank you! :)
----------------------------------------------------------------------------------------------------------------
Print with:
PLA
3 wall loops and top/bottom shell layers
5% infill
no supports are needed for any part
no brim needed for any part
use slow speed - else the nozzle may push against the beams
Parts:
NRW_Bottle_Holder_Modular_3X
A row of three spaces for your bottles
~150g filament
213x73x151mm
NRW_Bottle_Holder_Modular_1X
A space for your bottle
~50g filament
73x73x151mm
NRW_Bottle_Holder_Modular_Bolts
4 printable bolts, for one side.
~5g filament per set
5x5x10mm
NRW_Bottle_Holder_Modular_Suction
4 printable bolts, to attach suction pads.
~5g filament
Made for usage with the 20mm ones found here: Suction Pads @Amazon EU
Six Pack:
2 times NRW_Bottle_Holder_Modular_3X
3 times NRW_Bottle_Holder_Modular_Bolts
Some glue may be needed
~300g filament
optional suction pad adapters are available
Updates:
none so far
----------------------------------------------------------------------------------------------------------------
I'm looking forward to your comments and makes. :)