K1 Door Hinge Mount Flanged Ferrule Thing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the little plastic things that go in the hinge mount holes in the K1's glass door.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a replacement for the little flanged plastic things (Ferrules? Grommets? Eyelets?) that go in the hinge mounts in the K1's glass door, which prevent rattling and provide a buffer between the glass and the metal screw.
Two of these had been lost in the abyss of my shop couch, and there did not seem to be a model I could find readily (read: had been drinking a bit and had sufficient patience for ten seconds worth of searching, which bore no fruit) so after I slapped this together in Orcaslicer I figured I'd just post it.
Printed on modded K1 with .4 nozzle in Elegoo Rapid PETG on a textured PEI plate. I can vouch for this working fine. I don't know how other filaments will do with this application but can't imagine one needs to be too picky.
3mm ID, 4mm OD. Flange is 6mm OD and .8mm thick.