1 / 4
Speaker Grill for the DIY Speaker from DIY Perks — zdjęcie 1
1 / 4

Speaker Grill for the DIY Speaker from DIY Perks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Made a grill myself because I didn't like the ones available.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
196
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Public Domain

Just print it flat and use supports. I made 100% infill, but that is up to you. 

Afterwards, I sprayed it the same colour as the speaker itself and done. Looks better in my eyes and keeps the 3D model look.

Use normal 5x8mm  (N52 or N35 - I used N52. 5= diameter, 8=length) round magnets. Place the magnets into the pegs, glue into speaker and finished. They need to be pressed in due to a tight fit, so have a clamp or a big vice ready. I used a wood clamp and they work perfectly.

Tagi