O-Scale Christmas Boxcar with Family Photo Frames
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
O-Scale Christmas Boxcar with Family Photo Frames and removable roof.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Add your favorite family photos to a Holiday themed Boxcar that you can add to your Family's Christmas Tree Train. Then on Christmas morning open the roof of the boxcar to surprise the family with a hidden Candy surprise.
Boxcar design is my own, per a request for a friend to surprise his kids on Christmas. However, Trucks were a modification from those in the O-Scale Gondola by ProgressTH at https://www.thingiverse.com/thing:4354763.
My Friends request was that he wanted a box car where he could add family photos and hide a candy surprise for his family on Christmas. So I have designed this to have 4 pictures frames, 2 on each side. The roof has pegs that will come down and sit in some holes in the top of the body, making sure that it stays aligned and in place until one wants to take it off and get inside. The inside is hallow so you can fill it up with whatever you desire; candy, Legos, small toys, etc. You can also get to the photo frames from the inside. Each frame has a small slit in the top where you can slide photos in and out. Boxcars traditionally have car numbers so that each railroad company can track them. Instead of just giving this Boxcar a random set of numbers, I have given it a special number; The date of Christmas this year, 12-25-24 (minus the -'s). I also added my Friend's family name as part of the railroad name along the side of the box car. In the STL files the side of boxcar body will only say "Family Christmas Railroad", As I removed my Friend's Family name, but if you want to add in your own Family's name, I have included the obj file so you can edit it.
Boxcar is fully 3D printable and has been tested to run on Lionel's O-Scale Fast Track as well as Lionel's Vintage O-Scale Tubular Track. Printed parts include roof, body, base plate and trucks. Only none printed parts needed are 10- M3x10mm screws (4 for attaching base plate to body, 4 for assembling the trucks and 2 for attaching trucks to base plate), 6 M3 nuts (4 for assembling the trucks and 2 for attaching trucks to base plate) and a thin wire that goes through the axels.
Boxcar's Final assembled dimensions: 9in long, 2.5in wide & 4in tall. Photo frames are about 2in wide x 1.25in tall.
I printed this using my Ender 3S1 which has a build plate size of 9inX9in (230mmX230mm) so I had the following settings:
Body- oriented on an 45* angle, upside-down with supports. No brim/raft. Printed with PLA+ White
Roof- oriented on an 45* angle, upside-down with supports. No brim/raft. Printed with PLA+ Red
Base- no special orientation. printed with no supports & no brim/raft. Printed with PLA+ Black
Trucks-no special orientation. Printed with no supports. I do suggest printing at least the axels (circled red in trucks photo) with a raft due to their low surface contact. Printed with PLA+ Black.
Everything was printed using a 0.4mm Nozzle, 0.16mm layer, 50% infill (cubic).
See attached photos for trucks assembly.
Since I can only print one color at a time, I hand painted the Roof and Body with various other holiday colors to highlight some of the details. Please note in the attached photos of my print, I had to add some screws to the roof instead of the little pegs that come down to line up with the body. My first print had these pegs much smaller and they broke off. I have corrected that in the STL file, just did not have time to reprint it for pictures. Also when I was removing the support material from the top of the roof I left a little of it there instead of completely sanding it down. It was giving me this really cool rough thatched material look and I really liked that.
Files included:
PhotoFrame_Christmas_Boxcar-Body.STL
PhotoFrame_Christmas_Boxcar-Roof.STL
PhotoFrame_Christmas_Boxcar-Base.STL
PhotoFrame_Christmas_Boxcar-Trucks.STL
PhotoFrame_Christmas_Boxcar.obj