Liczymy pasujące modele…
Hello, I have the Perfect Family for your diorama or model railway. The figures are now in 1:15 scale. Here is the conversion for model railways, so you know how to adjust the scale: Scale Reduction Approximate height of the figure (cm) G…
Customizable in OpenSCAD. My is for TT scale. Print Settings Printer Brand: Anet Printer: A6 **Rafts:** No Supports: Yes **Resolution:** adaptive 0.07 to 0.2 Infill: 25 **Filament:** na3d PLA silver Notes: Printed upside down, in 3 pcs.…
Two boxes, one for the tokens and one for the point tiles. You will need one “Box bottom” for each lid. The lids have symbols showing what goes into each of them. Helps make things easy to find and quick to get to the table.
This product might need to sand down of the long skinny ends closes to the rail. this only happens when your filament is a little imperfect, which that is completely normal. ;)
Hello, I have the Perfect Family for your diorama or model railway. The figures are now in 1:15 scale. Here is the conversion for model railways, so you know how to adjust the scale: Scale Reduction Approximate height of the figure (cm) G…
Simple steps to match the Hornby Railroad class 47. Simply print out and stick in place over the existing ones. Designed for an STL printer, but may work with other printing methods. Black PLA is the best filament to use otherwise…
Replacement tie for G Gauge track. Used USA Trains brand Code 332 for fit.
Aluminum hopper used to haul Sodium Chlorate for the Paper Industry. You will need: 12 pieces of 1/8" metal rod about 1" long. 1.2mm brass for grab irons 16 1/4" long piece of aluminum bar stock (Hillman #11288 #11289) Optional 12 pieces…
You can remotely control gates powered by N20 DC motors. It is accompanied by warning lights - flashing two red lights or when the gate is open, one white flashing light (used in some countries). There are two versions, one track two…
Hello Everybody, I changed a little bit of Smuk3Ds Rail Crossing. ATTENTION: The gate and the pillar have to show a V when you are pushing it together. My kids are loving their new toy hope that your kids will love it, too. Happy Printing…
Tank car for my 1:29 Scale Garden railroad. End cap is a customized version of https://www.thingiverse.com/thing:953781 You will need: 3" (3.5" OD) Schedule 40 PVC pipe or 4" OD Aluminum "Air Intake" pipe (Print 4in alternative parts) or…
Old style Belgian railroad signal, using the rounded plate from the 50-60's. This is drawn up based on old plans and my own measures. Of course adapted to the printing technology. The base of the model “basis voet” could be modified…
Modern Belgian railroad signal, using the square plate. This is drawn up based on plans and my own measures. Of course adapted to the printing technology. This is the original version for PLA printing, I have worked on a resin print…
This terrain covers the Skagway Railroad route. This was generated with https://jthatch.com/Terrain2STL/
This is a railroad finial that is to scale of a little over 18 inches from top to bottom and 5 1/8 inches round at the base to accommodate a 5 inch mast in real life. You can scale this as you choose to whichever scale you wish. Print…
Pinnacle, or finial for a mast that goes on a railroad signal. It is for 5 inch mast, but can of course be scaled to your liking. Category: Buildings & Structures
This is a light lens, or roundel used primarily by the Pennsylvania Railroad in their position light signals and Norfolk Western used these lenses until 1959 when they started upgrading their lenses to color lenses, aptly name Color…
Railroad spike from actual US rail. High resolution scan of spike recovered from abandoned rail near Camp Hale which is a former military base high in the Colorado Rockies.
This Position Light model was created to resemble position lights of the Norfolk and Western Railway with short hoods of just over 11 inches. Although the Pennsylvania Railroad also used these types of hoods as well. This light box is…
The Idea behind this thing is to use color switching on a singe extruder machine. So I designed the white groundplate together with the black train in one piece. After that the red triangle has to be printed separately and glued into the…
Model was made from profile found on Wiki of the New York Central System Dudley 127 lb/yd (63.0 kg/m) rail Full scale Depth is 10" and 7" tall Not sure what to do with it yet thinking of making some fun shelf bracket covers with it for…
Small, simple building for H0 1/87 scale modelrailway. It could be a shelter for railroad worker but also a garden shed. Print all pieces and glue it together. Depending on your printer, support and brim can be useful for the walls…
Simple LED insert for a Adlake railroad switch lantern. Insert is intended for use with a tbulb 2 S. Available From Amazon. Center hole on insert is threaded for the threads on the tbulb 2 S. Power wire can be routed through the…
This 2 to 1 crossing allows you to make a street intersection or simply cross multiple other tracks. Two 10mm M3 screws and a bit of CA glue is required for assembly. Optionally eight 6mm by 2mm round magnets are recommended in order to…
This is a collection of Christmas-themed girder bridges created for an o-scale 1:48 model train layout. Although it is intended to fit Lionel Fastrack, it should also work for any o-scale track. I have included an 8in version that should…
This is a picnic table created for an o-scale 1:48 model train layout. It can be scaled to fit any other scale or just printed for decoration - (ho scale is 50% scaled, and n scale is roughly 25% scaled). Printing Instructions (Standard):…
railroad girder bridge scale to 250 on prusaslicer for ho scale trains.
Small Utility poles fore scala N Can be upScaled in a 3d slicer Can be printed on a FDM printer if correctly sliced. Use a toothpick and wood stain to create the pole. (For Scala N) Use a bbq wood stick and wood stain to create the pole…
A 12 x 20 metal shed with 2 side man doors for model railroading. Printed in Creality gray PLA No brim, close holes slicing mode, everything else at standard settings.
This is a truss bridge modeled after a bridge in Index, Washington, USA. Designed to be printed in flat parts and glued together with CA glue. I have included step files so you can adapt it to your layout.
This is a girder bridge modeled after bridges common in Washington, USA. Long and short versions.
English description (deutsch darunter) The insert consists of many practical parts to store all the game material. It also helps with setting up the game and speeds up dismantling. The box can also be stored upright, as the insert fills…
HO Scale Dispatch office used by the Lehigh Valley Railroad in Weatherly PA, on the site of the original Lehigh Valley Engine Shops and later Weatherly Iron and Steel Company. Currently Weatherly Area Museum. Photos from Facebook,…
Enhance your model train collection with this highly detailed 3D-printable railroad set ! This set includes a steam locomotive , two types of wagons , and a 50mm gauge modular track , perfect for hobbyists, collectors, and 3D printing…
Simple small brick building (10' x 10' 1:29 scale). Based on a municipal pump house but can be used to represent a number of similar structures. To enhance the grout lines, I brushed on a coat of grey craft paint, wiped with a paper towel…
HO Scale Model Railroad Dutch Barn RV Garage with two varieties of barn and optional rear stairs. It's best to print the roof on its end and the stairs on their side. Supports will be needed.
This is a custom railroad bumper train track compatible with the Lionel Ready-to-Play Sets. The railroad bumper train track is based on the 2017 Polar Express Lionel Train Set Parts. A complete set for the railroad bumper setup contains…
This is a custom railroad crossing train track compatible with the Lionel Ready-to-Play Sets. The railroad crossing train track is based on the 2017 Polar Express Lionel Train Set Parts. A complete set for the railroad crossing setup…
Customizable in OpenSCAD. My is for TT scale. Print Settings Printer Brand: Anet Printer: A6 **Rafts:** No Supports: Yes **Resolution:** adaptive 0.07 to 0.2 Infill: 25 **Filament:** na3d PLA silver Notes: Printed upside down, in 3 pcs.…
This railroad track is perfect for your 1/35 scale diorama's! Meant for resin printing
testing - side project for family member learning fusion360 (image-logo to object) ; turn out okay-ish black then used “pause” at layer 6 to switch out filament 0.4mm nozzle @ 0.20 layer
testing - side project for family member learning fusion360 (image-logo to object signpost) ; turn out okay-ish black then used “pause” at layer 26 to switch out filament can print the base along with signpost on same plate 2 versions -…
Wanted to see if I could create a model that is recognisable as a railroad tie. Faces are too smooth, needs to be roughed up in blender. Maybe a stack would be interesting.
This is a “proof of concept” level experiment. I was visiting the California State Railroad Museum, which is in an the old Southern Pacific roundhouse, and saw the rails embedded in the floor. There is also a great model railroad exhibit…
It is an enlarged reduction from railroad to rail. Please download and like :)
Einfache Aufgleishilfe, es wird Support benötigt, kann auch über eine Weiche verwendet werden Simple rerailing aid, support is required, can also be used over a turnout Category: 3D Printing
I enjoyed the Binary Arts Railroad Rush Hour puzzle game, however, I found the hollow game pieces were flimsy and tended to jump off the board easily. You can print these game pieces as dense as you like with your 3D printer. Printing…
The railroad crossing is build up by 5 parts to get a smooth surface for the road. To connect the parts of the inner and the outer curve, I have designed a dovetail guide. The parts was assembled in a vice to avoid tilting, but it should…
Keychain with the logo of RZD - Russian railroads, best to print face down for better surface result Size on picture, print time with 0.2 layer height and 35 speed - 13 minutes Брелок с логотипом ржд - советую печатать лицом вниз,…
This is rambros ' excellent EMD MP15AC model for Dragon Railway , remixed with an Eastman Kodak #10 livery to print on a Bambu AMS. This contains the new files for the EKRR livery, the rest of the parts and full assembly instructions can…
Three piece rerailer for Peco H0m track, designed with FreeCAD. When a train is moving over it, derailed axles are being pulled back on track. Typical use: place where ever suitable, in staging or hidden areas. Print instructions…
3D model of a Railroad Spike! I do blacksmithing as a hobby and thought it would be beneficial to have a 3d model of a railroad spike to assist in my work. I keep these all over, mostly in my house as something to hold onto while I'm…
The game Russian Railroads uses track pieces to indicate how far you've progressed along a path. While those are good, the end shouldn't be an empty piece of track, but a railroad "buffer stop" where rail cars are prevented from going…
Unable to find properly sized O gauge crossing signals so I designed this one. Uses 2 5mm LEDs and can be wired with old fashioned phone wire which I think is 28 or 30 gauge. Base has option of gluing a tube that will fit in a ¼ inch hole…
Standalone WH40k lamp, or a way to add accents to a model railroad lamp to make it more on theme. Other Monument type building pieces and greebles can be found here: Cathedral WH40k terrain Collection by Vontragg | Printables.com…
I have for you today yet another model so specific that it will be useful to absolutely nobody. But since it was my first attempt at modeling/printing a manual multi-color project (multi-color on the same layer with no MMU) I wanted to…
Two boxes, one for the tokens and one for the point tiles. You will need one “Box bottom” for each lid. The lids have symbols showing what goes into each of them. Helps make things easy to find and quick to get to the table.
Made an insert for the Collector's edition of Railroad Tiles (from the kickstarter). Sits in 3 layers. The bottom and middle layer are identical in height. The top layer is smaller. Each of the bottom 2 layers will take 2 short inserts…
This is a board game insert for Russian Railroads, the 3mf files are design to work with a MMU unit to make multi-color lids and other pieces. This is built using with https://github.com/pinkfish/openscad_boardgame_toolkit/wiki the source…
Organizer for Railroad Rivals, cardboard version, that fits in the original game box insert. Print 5 player boxes for the trains. The 2nd photo shows 5 boxes with 5 lids, but they are designed to be stacked together with 1 lid on top.…
This is a box insert for the retail version of Railroad Tiles along with the World expansion , designed to keep all the components organised in the box and make setup faster. This insert is designed to let you store all the route tiles in…
I designed these Standoffs from 5mm to 60mm to support N-Scale Railbed Pieces
I designed this 300mm Modular Tracksupport to fit N-Scale Railtracks and to fit the Standoffs, so you can build up Ramps
I designed this adapter to enable links between well known LEGO tracks and my standard (Euroreprap Railroad System), that was created for my 3D printable trains collection.
Beginner in 3-D printing, so just wanted to try Fusion 360. Made the connectors a bit loose, so the tracks will have some space for movement.
The main difference between this insert and others is that it stores the Objective tiles horizontally, with all of them fully visible. This makes it very convenient to choose the three you need for a game. There is space to store 32…
I'd found a few other parts of inserts that I liked, but nothing that I was totally happy with so designed this using those as inspiration. It supports vertical storage thanks to the spacer which uses the boards to hold everything in…
Railroad track inspired by hit Broadway show Hadestown. Includes lyrics from the show, a songbird and rattlesnake, and a rose.
Bridge with easy slope and 80 mm elevation. Each side consists of 3 parts. Created in FreeCAD. Compatible with pillar:
Printable without support. Compatible with "Easy slope bridge" with the same elevation 80 mm. Created in FreeCAD.
Railroad Island - Mini Train Diorama 2025 was the year of the “Mini Train,” which is why I saved something special for the end of the year. In Railroad Island , the concept of inside and outside is slightly reversed. On the island, the…
Designed for maximum realism , it is ideal for trackside scenes, stations, yards, depots, and urban or suburban areas on model railway layouts. The fence features: Accurate proportions based on real FS concrete fencing Clean details…
This model represents a typical modern railway fence and is designed as a single solid piece , avoiding complex assembly. The comb-style structure ensures strength, precise alignment and easy printing , even on small FDM printers like the…
This is a coupling I drew up based on Kozo's A3 book. I have this printed in aluminum as a key chain.
Here's a Railroad Ink box insert that holds 6 markers and 3 expansions! The markers are clipped in at the bottom, just to keep them in place. There's also a spot for cards if needed. Print as situated in the STL, 0.2mm nozzle and 15%…
Some signs I drew up to go next to the track when running live steam trains. The V block is designed to take 5mm heat set inserts. There are whistle board, yard limit, and railroad crossing signs.
I made these light fittings for inside a 3/4" scale carriage that I'm restoring. Published here in case they are of use to anyone else. The lamp bowl is vacuum-formed around the buck I used, with 0.25 mm clear PET. The lamp body needs to…
This product might need to sand down of the long skinny ends closes to the rail. this only happens when your filament is a little imperfect, which that is completely normal. ;)
This is my holiday gift to the most awesome online community there is! I was about to give a friend of mine an old hitch cover that was shaped like a small Railroad Knuckle coupler, when I realized I could probably make a much more…
Simple steps to match the Hornby Railroad class 47. Simply print out and stick in place over the existing ones. Designed for an STL printer, but may work with other printing methods. Black PLA is the best filament to use otherwise…
A unique 3D printable creation — this Ho Scale Railroad Crossing Guard Shanty, Small Booth, Vintage Wooden, Ho 1-87 Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
A unique 3D printable creation — this Ho Scale Freight Loading Platform, Railroad Dock, Wooden Construction, Ho 1-87 Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
A unique 3D printable creation — this Ho Scale Railroad Signal Bridge, Spans Double Track, Vintage Semaphore Style, Ho 1-87 Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
A unique 3D printable creation — this N Scale Railroad Water Tower, Steam Era, Small Footprint, 1:160 Scale Detailed Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
A unique 3D printable creation — this Model Railroad Details Pack Bundle of 6 complete 3D printable model packages. Save $10.77 (45% OFF) compared to buying individually! **Models Included:** - Ho Crossing Shanty - Ho Mile Marker Posts…
A unique 3D printable creation — this Complete Model Railroad Set Bundle of 8 complete 3D printable model packages. Save $24.93 (62% OFF) compared to buying individually! **Models Included:** - Ho Coal Tipple - Ho Crossing Shanty - Ho…
Ottawa River Railroad Bridge This is an HO scale model of the two track concrete arch bridge of traditional design that carries the Norfolk Southern tracks over the Ottawa River in Toledo, Ohio. The model was developed using information…
Replacement tie for G Gauge track. Used USA Trains brand Code 332 for fit.
This is an HO scale model of the CSX railroad bridge over the Norfolk Southern railroad in Beaver County, Pennsylvania. It was built in 1909 and is still in service. The bridge can carry 4 tracks over two separate double tracks. The model…
This is an HO scale model of the Pennsylvania Railroad viaduct over the Schuylkill River in Phoenixville, Pennsylvania. The model was developed using information from HistoricBridges.org and Google Maps in Fusion 360. For more information…
Aluminum hopper used to haul Sodium Chlorate for the Paper Industry. You will need: 12 pieces of 1/8" metal rod about 1" long. 1.2mm brass for grab irons 16 1/4" long piece of aluminum bar stock (Hillman #11288 #11289) Optional 12 pieces…
Here's a 1/64 scale phone booth, styled after the permanent public phone booths from 1950s America. The Superman phone booths looked like this. Optional door accessory included! Recommend printing the door upright with a brim for the best…
