Model Railroad Water Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A basic water tower for model railroads, scaled to be close to O Gauge. This is not a recreation of any tower in…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 625
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution
A basic water tower for model railroads, scaled to be close to O Gauge. This is not a recreation of any tower in particular, but is loosely based off a picture of a tower in Wisconsin I found. It's also not to any precise scale, but does properly fit on my O Gauge railroad under the Christmas tree.
I printed the tank and top in a wood filament and the spout and bottom in black. The stand prints pretty well, though my printer has a little bit of trouble while bridging the gap towards the top.
The holes to help attach the different parts don't quite fit on their pegs, so you'll probably need to trim the peg a little.
Category: Hobby