Soap Vise - In Development
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Over engineered vise to compress those little bits of soap into a new bar.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
**In development
This is a little device I created for those little bits of extra soap. Now you can compress them into a new bar. Screw in the bottom, place all those little bits of soap, add some hot water and compress. Once you are satisfied unscrew the bottom and push out your new bar. This is the first revision so let me know if you any suggestions.
After first print (printed in PLA Matte), tolerances are too tight. Lid and bottom need adjusting so they don't get stuck. First time using screws, top screws thread but are too tight and break after a few turns, can't get bottom to start.
Will work on revisions.