Brio Wooden Train Bridge Stansion Support (optionally stackable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brio compatible wooden train bridge that connects to the track pieces and is, optionally, stackable for higher bridges.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 187
- Wydruki
- 1
- Wyświetlenia
- 625
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Share Alike
I really liked the design this is remixed from with one exception: the horizontal span vs the more 'normal' cross that you see on railway bridges. This remix addresses that, but it does mean that the print needs to be about 34mm tall before any of the legs connect with one another. If you have decent bed adhesion, this won't be a problem.
There are two STL/step file pairs, one that's stackable and one that's not. My kids broke the stackable side off one of the towers pretty quickly. Thin/long/tall bits are never going to be that strong. The towers themselves are surprisingly strong.
The stackable version does not fit corner pieces, but the non-stackable version will.
Like the original design, prints well with 0.3mm layers.