Moza AB9 FFB Base Height & Space Adapter For Moza AB9 Desk Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
50mm of clearance for joysticks plus the ability to adjust it lower see description for instructions
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 1237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
50mm clearance for joysticks that would normally hit the mount (tested with FSProjects A320 Side Stick) plus the ability to adjust it lower or just use it as a spacer
If you need more clearance drop a comment and I will happily upload another version that suites your needs
Printed with 15% gyroid infill, 12 wall loops + 20 top and bottom shell layers at 0mm top and bottom thickness
You will need:
8 x - M6 6x25mm round head bolts (not included with Moza mount)
4 x - M6 hex nuts (not included with Moza mount)
4 x - M6 hammer heads (included with Moza mount)
- Printed with 0.20mm layer height + 15% gyroid infill + 12 wall loops + 20 top and bottom layer height (zero flex, super sturdy, the metal mount gives sooner than the printed adapter during my tests)
- Tree supports for the holes, I used a long M6 allen key to push the supports out from the top (came out very easy)
312g of filament, printed using PETG on a Bambulab P1S
Enjoy!