3d printed mechanical clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is an almost fully 3d printed mechanical clock requiring only some thick filament, nuts, bolts, and bearings.
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 265
- Wydruki
- 0
- Wyświetlenia
- 2206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
I was curious about how mechanical clocks worked, so I started looking into it. First, I built the escapement, then the weight gears, and then the rest of the gears, each with a 1 to 60 ratio to tell seconds, minutes, and hours.
You'll need 3 bearings that are 10mm outer diameter and 3.5 mm inner, m2 screws and nuts(hex), and a single rod you can cut off about 3mm in diameter, I used some old 3d pen filament (3d printer filament is too small and won't work).
Here is a video of it working: