1 / 3
3d printed mechanical clock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It is an almost fully 3d printed mechanical clock requiring only some thick filament, nuts, bolts, and bearings.
- Rating
- 0 / 5
- Likes
- 47
- Downloads
- 265
- Makes
- 0
- Views
- 2,206
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
I was curious about how mechanical clocks worked, so I started looking into it. First, I built the escapement, then the weight gears, and then the rest of the gears, each with a 1 to 60 ratio to tell seconds, minutes, and hours.
You'll need 3 bearings that are 10mm outer diameter and 3.5 mm inner, m2 screws and nuts(hex), and a single rod you can cut off about 3mm in diameter, I used some old 3d pen filament (3d printer filament is too small and won't work).
Here is a video of it working: