Printable PG7 Cable Gland Strain Relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable gland with a printed M12x1.5 thread to fit existing mount designs for PG7.
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 667
- Wydruki
- 2
- Wyświetlenia
- 1946
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
BOM
Printed part 1 x 1
Printed part 2 x 1
Pan head self-taping screw M2.5x6 x 2
I want to use existing mount designs but my Voron 2.4 kit didn't come with PG7 cable glands and I don't feel like purchasing any. They're easily printable and replaceable, maybe even color coded to match my eventual Stealthchanger color theme.
Currently I am fitting a BTT CAN cable and one 46 gauge electric guitar string in that sleeve and this design is for this cable. I may create other sizes if I found them useful.
Print in ABS\ASA, Voron parts settings, no support. You want to use brim though as these parts are prone to warp. For non-enclosed applications PETG or even PLA Pro might work just fine.
Note some brands warp a lot more than others. Myself struggled to print these using Polymaker ABS for example due to excessive warping on the M12 thread.
Changlog:
2024-12-22: Initial Release.
2025-02-10: Adding 5mm and 7mm variants.