1 / 7
Leather wet mold for bracelet makers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This assembly allows to shape thin leather, in my case lizard skin, around a core.
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 1026
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (99)Powiązane
The mold consists in 2 main parts:
- the main body (in blue and green on the photos) which holds the front and the 2 sides of the bracelet
- the locker part (in yellow on the photos) which keeps the skin folded on the back of the bracelet
The main body is divided in 2 parts:
- the lateral holders: male and female (blue)
- the spacers (green) as the middle part (thickness = 3 mm), which can be piled to adjust to the width of the bracelet
The STL file contains a quarter of a circle of the mold. I've printed 3 sets in my case.
No specific advice for printing the body and the spacers. I had to use the Brim for the lockers.
Assembling: Screws and bolds are 4mm diameter size.
- Start with 1 set and mount the holders and spacers
- Use 2 screws+bolts to keep it together
- Place your bracelet in the holder
- Use the 1st locker to maintain one side of the bracelet
- Use the 2nd locker to maintain the other side.
- Use 2 screws+bolts to lock the body and one side of the 2 lockers
- Repeat with the second set and use 2 screws+bolts to assemble the 2 sets.
- Repeat with the third set.
Additional file:
- Jan2025:
- Spacer ring (2 mm) for thinner bracelet
- Spacer ring (1.2 mm)
- Aug2025:
- Spacer 1.5 mm