Leather wet mold for bracelet makers

The mold consists in 2 main parts:

• the main body (in blue and green on the photos) which holds the front and the 2 sides of the bracelet 
• the locker part (in yellow on the photos) which keeps the skin folded on the back of the bracelet

The main body is divided in 2 parts:

• the lateral holders: male and female (blue)
• the spacers (green) as the middle part (thickness = 3 mm), which can be piled to adjust to the width of the bracelet

The STL file contains a quarter of a circle of the mold. I've printed 3 sets in my case.

No specific advice for printing the body and the spacers. I had to use the Brim for the lockers.

Assembling: Screws and bolds are 4mm diameter size.

• Start with 1 set and mount the holders and spacers
• Use 2 screws+bolts to keep it together
• Place your bracelet in the holder
• Use the 1st locker to maintain one side of the bracelet
• Use the 2nd locker to maintain the other side.
• Use 2 screws+bolts to lock the body and one side of the 2 lockers
• Repeat with the second set and use 2 screws+bolts to assemble the 2 sets.
• Repeat with the third set.

Additional file:

• Jan2025: 
  • Spacer ring (2 mm) for thinner bracelet
  • Spacer ring (1.2 mm)
• Aug2025:
  • Spacer 1.5 mm