Voron Switchwire Raspberry Pi + BTT Octopus Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount that I designed to mount a BTT Octopus and a Pi 3B using the 3030 inside frame and 2020 Y carriage underside
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 355
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my 3rd revision of this mount for a Raspberry Pi 3B + BTT Octopus (PRO) for undercarriage mounting, It attaches to the 3030 extrusion via 3 M5 bolts and then to the underside of the Y carriage via 3 M3 bolts + the needed M5 & M3 T-Nuts.
The spacing is very tight on purpose, I wanted this to take as little space as possible and still be durable.
8 voron style M3 heatset inserts are needed for the standoffs
Your Raspberry Pi will need to be modified to accommodate M3 mounting bolts as well, else you will need to source the appropriate heatset inserts for mounting the Pi with the standard 2.5mm hardware.
.step file has been included for any modifications or remixes desired
Personal use only. No Commercial/For Profit use. Print it forward use is granted.