REAL 3D Printed Sound Panels!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable hexagon shaped sound panels to improve the audio in your space and reduce noise! REAL noise reduction!
- Ocena
- 4,5 / 5
- Polubienia
- 1327
- Pobrania
- 1906
- Wydruki
- 3
- Wyświetlenia
- 31 726
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hexagons maker everything better!
Sound matters in any space, but especially for Content Creators, Musicians, or Home Theaters. These are 3D Printable Sound Panels! You print the hexagaons, stuff them with your choice of sound damping material, and hang them on your wall. They provide a stylish looking option to reduce reverb (echo) in your environment and tone down any harsh frequencies you may have.
Intended to be stuffed with 2 inch thick sound insulation (50.8mm) that is wrapped in thin fabric. Mine were hung with "Command Strips" on the side flanges, but I've also added a keystone hole to the top point for those who wish to use a screw for hanging.
See the full design in action and how it goes together in this video:
This design REQUIRES VERY SPECIFIC PRINT PARAMETERS! Please pay attention to the "Recommended Print Settings" section below!
Design fits a 360mm build volume and to be printed with a .8mm nozzle at .85mm Extrusion Width! I designed it for the Prusa XL but anything 360mm or larger should be able to print this design. Multicolor will require that capability of the machine as well. 3MF files are included with the Required slicer settings already setup for a Prusa XL.
Parts To Make (Affiliate Links):
Files Included:
- Hexagon Sound Panel STL (Multibody for "splitting" in slicer.)
- Hexagon Sound Panel STEP File (For Remixing, Attribution Required!)
- Multi-Color 3MF file with proper Slicer settings (Prusa XL .8mm Nozzle)
- Single-Color 3MF (Sliced for Prusa XL but will work for others w/ .8mm Nozzle)
Recommended Print Settings:
Hex Panel Frame:
- .4 Layer Height
- 2 Perimeters
- .8mm Nozzle (set all Perimeters to .85mm Extrusion Width)
- 1mm Extrusion Width for Infill (Important for inner panel strength)
- 5% Adaptive Cubic Infill (15% above 64.2mm for better top surface finish)
- NO Supports Required (Design has in-built supports.)
Inner "Infill" Panel:
- "Split to Objects" in Slicer
- Set inner Panel to 8% Adaptive Cubic Infill (Gyroid MAY work)
- 2 Perimeters
- 0 Top/Bottom Layers (so only Perimeters & Infill print)
Want to Support what I do? Check out my social medias please!
Link Tree: http://www.MandicReally.com/links
Want to more directly support my work? Please consider checking out Patreon!: https://www.Patreon.com/MandicReally