1 / 6
spacer for Dart Zone Aeon (and Nexus) Pro X — zdjęcie 1
1 / 6

spacer for Dart Zone Aeon (and Nexus) Pro X

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

spacer for Dart Zone Aeon (and Nexus) Pro X

Ocena
5 / 5
Polubienia
22
Pobrania
147
Wydruki
0
Wyświetlenia
504
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The Aeon Pro X is debatably the best budget pro blaster, it even has a mod pack by the manufacturer! But it turns out the mod pack is some spacers, or so it seems. I took off the stock attachment and checked out the spring one night, and noticed that the spring was WAY longer than the length of pull. So I designed a spacer and i’m pretty sure two of them, (the gun can take two), get it to 200 fps.

INSTRUCTIONS: unscrew the four (4) screws in the stock attachment point and remove it. Inside you will see a twisting knob/rod that holds the spring in place. twist to remove (left, I think). The rod will slide out. place the spacers (it can hold up to 2) on the rod and reassemble.

The pull after the mod is pretty hard, you’ll want to get a stock. I’v designed one myself that you can print ;) https://www.printables.com/model/1119411-nerf-n-strike-stock

plz like and post a make! it encourages me to create more!

Print Settings

  • Rafts:

No

  • Supports:

No

  • Resolution:

0.2 mm

  • Infill:

100%

  • Filament brand:

dosen’t matter

  • Filament color:

any

  • Filament material:

PLA

Tagi