Ender 3/Pro/ V2 Airflow Motherboard Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits the ender 3, ender 3 pro, and should fit the v2 as well, but I have not tested.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 424
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I really liked the concept that KilianBLRD designed, but I needed a bit more out of it. So I made some modification to make the design even better:
Additional venting grilles were added to the case (and at an angle to look cooler)
The thickness of the lid was reduced
Case floor was raised to the height of the aluminum extrusion to avoid scraping when moving the printer and for better fitment
The hole for the motherboard wires in the back had the top portion removed for easier installation and printing
Supporting nub added near the z stop wire hole on the lid and finally the studs for the fan were shrunken slightly to get better fitment
Make sure you use regular supports everywhere, and use support blockers on the screw holes and the venting grilles.
Fits the ender 3, ender 3 pro, and should fit the v2 as well since that was how it was originally designed, but I have not tested that.