Elegoo Phecda Laser Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted my laser cutter to be laser guided...
- Ocena
- 3 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 578
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In order to better orient my work pieces, I wanted to have a eye-friendly laser.
So I designed a mount for a cheap laser module. It also allows the air hose to be threaded through.
I used this laser module: https://www.amazon.de/dp/B08QZGMYG2?ref=ppx_yo2ov_dt_b_fed_asin_title
The mount has been printed with SUNLU ASA on my QIDI X-Max 3 with a 0.4mm nozzle, 0.2 mm layer height, 1 wall and 15% infill using supports.
The original screws of the Phecda can be used to mount the laser mount. The metal bracket has to be removed.
For future versions I might try to get rid of the ambient glow. It seems like the air hose has accidentially become a diffusor. precision-wise I am quite satisfied. so I am not planning on increasing it.