57 modeli
Disclaimer: These are provided as is, you tinkering with your machine is your business and is no fault of mine. Note : This only works if you have the Genmitsu (or clone) limit switch. I had these left over after a 3018 repair so if you…
more info in next days. this version is for sensor super p.i.n.d.a. from PRUSA MK3 has 35mm total lenght i order from ali this cheap sensor and i update model when arived https://a.aliexpress.com/_mOfRH7w you need: 1x M3x12mm 2x M3x20mm…
Bracket to hold a 2020 to the rear frame. Parts needed 4x M5X10mm+ heat inserts 4x M5X50mm BHSC 5x M5X10mm BHSC 5x M5 v-slot nuts. Which ever type you generally use. The bracket with the larger slot goes on top. If you skip the middle…
I got tired of plugging and unplugging the y-axis if I wanted to use the rotary table of my Elegoo Phecda, so I designed a switch. Besides the filament, I used the following items: Aviation plugs:…
A quick print to mount the Elegoo Phecda on the wall when not being used. Print in PLA or PETG Use re-usable cable ties or elastic ties to secure the printer to the hook on the model. Simple to print. Just duplicate the model in your…
This fixture will allow you to set a position for your Elegoo Phecda laser engraver and prevent it from moving. There are 2 models, one which is used with double-sided tape to allow temporary fixturing of the laser, and the other features…
Update - Reinforced the base so there is less chance of it snapping when you pull legs with rubber feet in and out while moving your laser. Decided to create some leg holders for my Phecda laser. These feet/mounts are screwed to waste…
https://cad.onshape.com/documents/a303c0c416ac4563db6019ff/w/5d59b9d015b039a9b6dfeb9f/e/dc710ba0221eeadcd5cb35c6?renderMode=0&uiState=66febf2135195a2139b5002d
Made this part a while back. This is a replacement for the vent cover on the Elegoo Phecda laser cutter/engraver. This enables you to attach either a 80mm or 100mm vent and vent most of the smoke coming from the cutter outside or…
Simples supports pour la protection des yeux. Simple supports for eye protection
Bracket to hold a 2020 to the rear frame. Parts needed 4x M5X10mm+ heat inserts 4x M5X50mm BHSC 5x M5X10mm BHSC 5x M5 v-slot nuts. Which ever type you generally use. The bracket with the larger slot goes on top. If you skip the middle…
I got tired of plugging and unplugging the y-axis if I wanted to use the rotary table of my Elegoo Phecda, so I designed a switch. Besides the filament, I used the following items: Aviation plugs:…
In order to better orient my work pieces, I wanted to have a eye-friendly laser. So I designed a mount for a cheap laser module. It also allows the air hose to be threaded through. I used this laser module:…
It bothered me, that the tubing of the air assist pump bends occaisionally and air flow wasn't good sometimes. You can of course work with a different tubing. But if you don't want to and keep the original tubing and connectors then this…
If you upgrade your laser cutter with endstops and the one for the x-axis is in the bottem left corner, you may want to protect your cables and tubing, when the fan spinns. Had no notable issues with ait flow so far. The cover opening is…
The board of the Elegoo Phecda is capable of automated air assist. Unfortunately it's a budget laser cutter, so it's not included. Fortunately I came across a reddit post to upgrate it myself:…
Vent adapter for Phecda laser cutter. Go from the factory square to 4" round vent duct.
A quick print to mount the Elegoo Phecda on the wall when not being used. Print in PLA or PETG Use re-usable cable ties or elastic ties to secure the printer to the hook on the model. Simple to print. Just duplicate the model in your…
Halterung um eine Wabenplatte von Amazon im Laser Engraver zu fixieren. Die Streben sind Optional und haben ca. 3-5mm spiel in der Länge um etwaige Fertigungstoleranzen bei dem Gerät auszugleichen. Die Halterung fasst für folgende →…
After purchasing the Elegoo Phecda, I encountered unpleasant smells at home and inconsistent cutting results. Despite these issues, the device remains highly precise and operates exceptionally well. Consequently, I decided to create a…
A simple storage rack to store your extra PHECDA laser feet when not in use. you can sit it next tothe laser or it has a hook that allows it to hang on the side of your PHECDA laser enclosure box.
A simple tray to store your extra PHECDA fett in when not in use. I have three versions of this one simple plain version and two versions with holes so you can mout it somewhere.
I opened the ends so it is easier to raise and lower by pulling or putting on legs.
I used 8mm wide 5v white LEDs (connected to a charging brick), but it can easily fit wider LED strips. Depending on where u want the mounts to be, u might need to trim a part of the clamps.
Elegoo phecda air assist pump holder/mount with holes for zip ties to secure air pumps feet in place You can either string it up to reduce the vibrations and noise, or screw it in place.
A 3D printable version of the PHECDA legs/risers. Same dimensions as the original legs but with hex profile to make screwing in and out easier.
This is a filter box for the elegoo phecda that uses activated carbon pellets/cloth and 2 40x80mm hepa filters. The hepa filter can be purchased from amazon here…
This fixture will allow you to set a position for your Elegoo Phecda laser engraver and prevent it from moving. There are 2 models, one which is used with double-sided tape to allow temporary fixturing of the laser, and the other features…
Description I installed the modification to control the air‑assist pump from LightBurn on my Elegoo Phecda 20W laser. This upgrade is well described on the Reddit page…
This will allow you to connect a 2 in" hose to the Elegoo Phecda.
I wanted something to help with repeatable jobs for my PHECDA laser in lightburn, so I made this in order to be able to quickly position my tags and use saved positions in lightburn. the little notch goes around the leg of the machine. I…
This is a model designed to help keep the position of the honey comb panel for PHECDA Engraver in a fixed position. It is not perfectly centred on the day it was uploaded, but I will seek to change that by getting accurate dimensions from…
The honeycomb grid for the Elegoo Phecda laser engraver is an awkward thickness for the stock risers. With one set of risers the machine sits too low and with two it is too high for material up to around 6mm (¼"). These risers are a…
Leg locators for Elegoo phecda laser to give defined location, also height adjustment using 2mm pins, allows you to leave the additional risers fitted if used with honeycomb corner locators. Corner location for honeycomb bed again with…
The cable clamp wich holds the big wire loom that goes to the gantry on the Elegoo Phecda is poorly positioned. Because of that the cable can rub on itself durng movement to the front or worst case even get stuck. So even before my first…
Adjustable risers for the new Elegy Phecda laser engraver and cutter. Riser (legs) of 20mm, 30mm and 40mm (by combining them you can go to 50,60,70,…) I also made a 5mm feet I printed in TPU to absorb the movement of the machine, you also…
There was an issue with the Bottom right having extra stuff blocking it, making it impossible to remove
This universal laser crosshair holder can be mounted on the laser unit of the Elegoo Phecda (or other laser engravers) to provide a laser crosshair on the workbench. It mounts a crosshair laser (~5$ on Amazon) with a coin cell holder (~1$…
Using andStop 3D printer and 6mm socket T-nut you can use laser geometry to house endstop. Endstop assy X Elegoo Phecda
bracket for endstop Y axis laser phecda elegoo, I used endstop ender 3 or tronxy, you can find them on amazon
Update - Reinforced the base so there is less chance of it snapping when you pull legs with rubber feet in and out while moving your laser. Decided to create some leg holders for my Phecda laser. These feet/mounts are screwed to waste…
This attachment is meant to be slid over the risers which enables you to solidly attach material to the Phecda. The goal of this design is to allow you to attach a piece of wood to the cutter so it doesn't shift, vibrate, bump, misalign,…
simple limit switch system for Elegoo Phecda laser using basic momentary switches - ie the type from an Arduino kit. Needs a bracket or something attaching to the Gantry to trigger the Y Switches For the X switches on the gantry I glued…
For Bambu printers download profiles in makeworld, search for me by my user. Para impresoras Bambu descargar los perfiles en makeworld, buscame por mi usuario. Model I designed this hinge for the protective cover of the Elegoo Phecda…
“limit switches parts.3mf” is a ready prepared Bambuslicer-project including supports etc. If you do not use BambuSlicer, you may use the also included 4 single pieces instead. You may also have a look at my OnShape-project. Beware: it…
This is a simple organizer and toolholder for the tools and accessories that ship with an Elegoo Phecda laser engraver. Two screws are needed to mount the toolholder. There is a place for the screwdriver, three hex keys, wrench, micro SD…
Made it clamp the cable tighter Mirror the clamp to point outwards. So cable wont pull out Little thicker
Elegoo Phecda laser cutter & engraver carbon filter extension. For more filtration of odors. For carbon filter mats and carbon granules. Before installation, remove the original cover for increased airflow. The original filters can be…
Maximisez l'organisation et la propreté de votre espace de travail avec notre boîte de rangement mural sur mesure pour les filtres Hepa de 93x93mm, spécialement conçue pour l'Elegoo Phecda. Cette solution de rangement élégante et pratique…
A flange for the fan/tubing that is provided with the Elegoo Phecda enclosure.
Pièce ayant pour but d'empêcher le tuyau du air assist de forcer sur le coin du laser lorsqu'il revient proche du point 0 en X Part intended to prevent the air assist pipe from forcing on the corner of the laser when it returns close to…
I designed this filter holder to filter the air from the housing before it is extracted. The size is adapted to the filters that were supplied with the laser cutter. I use a 12v 10,000 RPM server fan for extraction, as the original fan is…
I designed this very simple fan adapter because I wanted to have something a little bit sturdy to mount my larger fan on the enclosure. Simply print with standard settings with filament of choice. Be careful to print the fan grill in the…
Support pour rehausser le nid d'abeille avec l'utilisation des rallonges de pied afin de ne pas avoir à tout démonter 4 vis de 5x20 et 4 écrous de 5 (Collé au double face sur le nid d'abeille) Maintient de ces réhausse avec une pièce à…
For using the Elegoo Rotary Attachment you will need to extend the height of the whole frame. Either you buy them from Elegoo directly or you print them. I scaled the threads so that there is no post processing needed. Print and screw…
Somehow I lost the top panels that cover the joints of the PHECDA frame and therefore created it. It's just a quickly created model. Glad if it helps anyone.
