Filter Holder for Elegoo Phecda Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filter Holder for the ventilation opening of the official Elegoo Phecda Enclosure to filter the air before venting out.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 497
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this filter holder to filter the air from the housing before it is extracted.
The size is adapted to the filters that were supplied with the laser cutter.
I use a 12v 10,000 RPM server fan for extraction, as the original fan is probably too weak to transport the air through the filter.
In addition, I mounted the filter at the outer end to work exclusively with negative pressure and thus prevent the unwanted escape of smoke into the room.
The filter holder is simply screwed onto the original hose connector on the housing as seen in the pictures.
Printable without supports and 25% Infill.
I recomend printig with 4 solid layers at the bottom for more stability at the contact points of the screws.