Elegoo Phecda Foot Raisers 70mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For using the Rotary Device from Elegoo you need these raisers
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
For using the Elegoo Rotary Attachment you will need to extend the height of the whole frame. Either you buy them from Elegoo directly or you print them.
I scaled the threads so that there is no post processing needed. Print and screw them together.
I added the STEP file too so you might wanna scale them by yourself if needed.
Printed with some leftover PLA. Nothing special to take care of. There is also nearly zero wobbling around when the laserhead is moving.
If you have bed ahesion issues, use a brim. 5mm only outside works for me.
I attached also some positioning “system”. Pretty simple but fulfills all my needs. I would definately recommend using such kind of system mounted on a wooden plate. since you will me able to move the frame, screw in your raisers and your position will be pretty accurate again.