Bosch GLM 50 C Holster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The supplied sheath that came with my Laser really sucked. So I made my own.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The nylon pouch that came with the laser is terrible. Its tight, difficult to get the unit in and out, and it would turns the unit on wasting the battery. So I came up with this design. The interior narrows at the bottom holding the unit snug. The cut out allows it to be popped up releasing it for easy removal. The clip will fit a 2" (55mm) belt, or clip onto a pocket.
I printed in TPU (98 Shore) so its stiff, but still fexible. Other filaments could work, but this was designed with TPU in mind.
Nozzle 0.4, layer height 0.12, tree supports.