Bafang 850c P850c Display Controller Protection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective case for the flimsy Bafang 850c display controller buttons
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 155
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When my wife got a Bafang motor installed on her bicycle, I immediately noticed the edge of the + and - buttons of the controller. They can easily be damaged because things (fabrics like scarfs, coats) can get caught behind the bottom edge of the buttons. I offered to create something to prevent it. But it wasn't neccecary she assured me, she didn't want it. I knew better.
So last week she came to me. Buttons damaged. Who would have thought of that? Sigh.
I ordered a new controller AND created a protective casing.
Placement:
- Controller needs to be removed from the handle bar. Then the controller can be placed in the lower part of the protective case. The right side has a small cutout for the wire.
- Put controller and lower part of the protective onto the handle bar and tighten the original bolt and nut of the controller.
- Press the top part on the lower part and use 6 M3 screws to connect the 2 parts together. Screws need to be inserted from below.
_____
Luckily I printed 100% PETG. The handlebar in my case isn't just 22mm but has a mirror mounted at the end. The miror part is thicker so I had to remove plastic on the lower part to make it fit around the mirror part. With a normal 22mm handle bar it's no problem.