P
PrintablesJKM
bike light holder for Bafang
Bicycle light holder for Bafang Light: https://vi.aliexpress.com/item/1005001688558602.html?spm=a2g0o.order_list.order_list_main.27.21ef18021SdWlL&gatewayAdapt=glo2vnm
- Pobrania
- 579
- Polubienia
- 14
- Ocena
- 5
Wyniki wyszukiwania: bafang
Liczymy pasujące modele…
P
Printablesdertester
Bafang Protector Guard (incl. cables)
Hey, this is a protector for the Bafang BBS01 BBS02. The protector is held by a zip tie and protects the cables very well. Check the picture! Rafts:Doesn't Matter Supports:Doesn't Matter Resolution:0.4 (more info note below) Infill:10…
- Pobrania
- 308
- Polubienia
- 27
- Ocena
- 5
P
Printables1D_Design
Bottom Bracket Tool 44mm 16T for (Bafang, G510, Ultra)
Bottom Bracket Tool for Bafang mid-drive use a plier to tighten the nut ( size of the hex is 45mm) Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 30-50% Filament:…
- Pobrania
- 306
- Polubienia
- 28
- Ocena
- 5
P
PrintablesiKOM
Bafang BBS01B BBS02B motor protector cover
I designed this motor cover to protect the motor from dirt and water. It's designed to clip onto the motor without the need for cable ties or additional mounts and it has proven to work extremely well. If you find this part useful please…
- Pobrania
- 272
- Polubienia
- 23
- Ocena
- 5
P
PrintablesBent Derailleur
eBike Speed Sensor Bracket (Bafang/CYC)
Mounting bracket for chain stay. The original spare bracket is good but sensitive. This one is simple and replaces it. There is a small angle to make it aligned with the spokes. Update 2025-04-21: I noticed it works great for CYC Photon…
- Pobrania
- 208
- Polubienia
- 18
- Ocena
- 5
P
PrintablesTheParrotGuy
Bafang BBS01/BBS02 controller gasket
Print in medium hard TPU, use circular top and bottom pattern. Print slowly. It's better to have a slight underextrusion than too much. The model is slightly thicker than the original (2 mm vs 1,5 mm) so it squishes it a bit to help…
- Pobrania
- 184
- Polubienia
- 13
- Ocena
- 0
P
PrintablesMinitrowel
SRAM GXP / HOLLOWTECH 2 / BAFANG socket tool
SRAM GXP / HOLLOWTECH 2 / BAFANG BBS02 socked tool By: Michał “Stemic” (Stemic) License: Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.…
- Pobrania
- 164
- Polubienia
- 9
- Ocena
- 0
P
PrintablesPepe
Hydraulic brake sensor module mount Bafang
Angled holder for the Bafang hydraulic brake sensors. Use 3 zipties and double sided tape from the back to attach. Printed with PETG on its side, with 5mm brim.
- Pobrania
- 141
- Polubienia
- 18
- Ocena
- 4
P
PrintablesNevarus
Bafang BBS02B Cover
Habe die Abdeckung aus PETG und die Dichtungen aus TPU. Achtung! der Deckel und die Dichtung haben zusammen eine Dicke von 6mm . Eventuell muss noch ein Abstand zwischen Motor und Kettenblatt aufgesetzt werden. Print instructions Habe die…
- Pobrania
- 139
- Polubienia
- 14
- Ocena
- 0
P
Printablespipersw
Bafang connector male end cap fat
The original design have 0.4mm thickness on wall and floor, and the cap have a little play on the plug. I prefer a more robust cap, wich seal the plug too. printed wtih flex 98A, tight on plug, perhaps sealed for water (not tested). For…
- Pobrania
- 132
- Polubienia
- 15
- Ocena
- 5
P
Printablesbonnee
Bafang male connector end cap
End cap for bafang male connectors. Used to cover the unused throttle connector Print instructions Category: Sport & Outdoors Summary End cap for bafang male connectors. Used to cover the unused throttle connector Print Settings Printer…
- Pobrania
- 132
- Polubienia
- 13
- Ocena
- 0
P
PrintablesNevarus
Hailong Akku Support 50mm Tube Bafang BBS02 / BBS01
Hello, here is the Support Tube holder for Hailong Akku https://www.aliexpress.com/item/1005001315092775.html?spm=a2g0 Works with all bike down tube of constant 50mm mounted with cable ties printed with Caribou 220 Mk3S ( modded Prusa i3…
- Pobrania
- 120
- Polubienia
- 18
- Ocena
- 0
P
PrintablesZo
Bafang BBS e-bike Motor axle locking ring tool - Montagewerkzeug für Hollowtech BAFANG Mittelmotor BBS Innenlager Schraubenschlüssel
My e-Bike motor broke, so i needed the tool to open the locking ring and nut on the mid drive axle, youd probably need to lasercut it with a hard material or print using tough resin for it to not break
- Pobrania
- 106
- Polubienia
- 9
- Ocena
- 0
P
PrintablesJoris
Bafang battery holder or REENTION Polly DP-5
I created a bracket to hold a Bafang electrik bike battery. Just screw it to the wall, i made 3 holes in the model. Print flat and use support. Happy printing! Print instructions Category: Sport & Outdoors Summary I created a bracket to…
- Pobrania
- 105
- Polubienia
- 23
- Ocena
- 5
P
PrintablesDub_Whytie
Bafang 800s Display handlebar mount
I fell off my bike, a Bafang electric bike conversion. i broke the mount for the lcd so decided to make one. this fits my lcd (800s) i do not know if i fits any other model.
- Pobrania
- 100
- Polubienia
- 8
- Ocena
- 4
P
Printableszea
Bafang eBike brake disconnect hal sensor and magnet attachment to Shimano SLX brake
This is made up of four prints. The holder of the sensor attaches to the main brake body using thin zip ties and points up towards the length of pull adjustment knob. The two parts with threads on the outside sandwich around the length of…
- Pobrania
- 97
- Polubienia
- 16
- Ocena
- 0
P
Printablesduongc
Bafang DP C240 CAN Mount Replacements
Replacement parts for the Bafang DP C240 CAN LCD and Button Mount. The tolerances are relatively tight so there might have to be some sanding/filing/post-processing. LCD Mount Requires original hardware 3x M2 screws 1x M3 screw and…
- Pobrania
- 89
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDRALUOP
BAFANG GUARD (BBSHD-BBS01-BBS02) Electric Bike Rain Snow Mud Protector
Protect your Bafang BBS01, BBS02, or BBSHD motor with this 3D-printed guard, easily installed on your bike frame with simple zip ties. Designed to shield your motor from rain, snow, and mud splashes from the front wheel, it’s especially…
- Pobrania
- 87
- Polubienia
- 8
- Ocena
- 5
P
PrintablesMarián
Objímka pro uchycení tlačítek BAFANG DPC18
Objímka pro Tlačítka pro display C18 od Bafang. Verze “darovaný vzor” je se souhlasem majitele přidán a sloužil jako inspirace pro můj model. V2-zvetšen otvor na řídítka Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No…
- Pobrania
- 79
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDr. Smashenstein
eBike Bafang Battery and Charger Wall Mounts
Wall mounts for Bafang eBike Battery and Chargers. Charger mount holds 2 chargers and would easily hold one with room for extra accessories. I included gcodes for printing 2 battery wall mounts at the same time as well as the single…
- Pobrania
- 79
- Polubienia
- 15
- Ocena
- 5
P
Printableswfvn
![Bafang DP-C10 mount for 22mm and 31.8mm steering bar [added 22mm version]](https://media.printables.com/media/prints/95be84d7-5cda-4abc-94da-6c66d8755676/images/11463951_76501785-62a8-436e-b2af-bcf78afd1994_a230c285-bd49-4087-972d-373fe599d964/2025-12-19-at-162633.jpeg)
Bafang DP-C10 mount for 22mm and 31.8mm steering bar [added 22mm version]
Bafang DP-C10 mount for 31.8mm bicycle steering bar. Created because the original part was broken. It's nor my bicycle, it's not my DP-C10. Created for my collegue. I do have the pictures (taken by him). Also got the message that it's…
- Pobrania
- 78
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMarián
switch +- bafang display c18
Tlačítka pro display C18 od Bafang. Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No Supports: No Resolution: 0.1 Infill: 100 Filament: PETG Recommendation:
- Pobrania
- 78
- Polubienia
- 9
- Ocena
- 5
P
PrintablesStar0nR 3D
Bafang engine wire housing
housing to deal with Bafang wires. free to modify, Freecad sources given ! enjoy remixes! See before and after through photos.
- Pobrania
- 77
- Polubienia
- 4
- Ocena
- 0
P
Printableswizhack
Bafang bbshd brake sensor mount tektro auriga comp
FR : Voici une cale qui permet de monter un capteur de frein magnétique fournis par bafang avec le bbshd (pour freins hydraulique) Tektro AURIGA comp qui était monter sur un vélo Btwin rockrider 520 de 2013/2014. Je l'ai dessiné car les…
- Pobrania
- 63
- Polubienia
- 5
- Ocena
- 0
P
PrintablesRybaMike
Bafang DP C18 display (UART / CAN) for BBS/ M620/ M400 Top tube mount
Move the Bafang display from handlebars to top for a cleaner look and protection in crashes. Also enables the use of handlebar mounted headlights. Designed for a 32.5 mm top tube, i've encluded the model so you can adjust to your diameter…
- Pobrania
- 52
- Polubienia
- 6
- Ocena
- 0
P
Printablesv1ncen7
Bafang speed sensor mount
I did not like how the original Bafang sensor is mounted so I used a Bosch rotor magnet and designed a different mount. It is quite specific to my bike frame but may be a good starting point for similar projects. One zip tie is used to…
- Pobrania
- 48
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKevinAkaSam
Bafang BBS01 BBS02 Center Shaft Nut Socket Tool
This is a printed alternative for the pretty pricey center nut tools for the Bafang BBS01/BBS02 (A and B) motors. This tool works just as good and did a great job for me. You need 4 M3 hex nuts and 4 at least 35mm long M3 screws.…
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 5
P
PrintablesPepe
Bafang bicycle LED lamp mounting arms 31,8 mm
Hi, this mount is meant for a 48V LED lamp supplied in Bafang BBS02B ebike kit. You will need 2 M3x20 screws (1 for each arm) and another one for the light. Model B has a hole for screw, model A has a hole for M3 nut. Printed with PLA,…
- Pobrania
- 44
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBent Derailleur
Bafang BBS Gaskets
Gasket for Bafang BBS motor. Three different Controller, the one with edge* Motor Crank body (optional) Print in TPU or similarPrint in TPU or similar * Have not had the oportunity to test the controller gasket yet. Hope it fits, please…
- Pobrania
- 44
- Polubienia
- 7
- Ocena
- 0
P
PrintablesTyl3r
Bafang Chain Guide
Got sick of the chain coming off the motor whenever I would hit a big bump. Other's have made similar ones but the one's I found you had to pay for. So I came up with my own chain guide and the chain hasn't come off since. Has been on the…
- Pobrania
- 44
- Polubienia
- 6
- Ocena
- 0
P
PrintablesPhamaral
Bafang DPC18 Garmin mount
A mount with the garmin connector for the Bafang DPC18 display Needs supports and I recommend printing with brim. Print it upright, like in the picture.
- Pobrania
- 39
- Polubienia
- 2
- Ocena
- 0
P
PrintablesOxmstr
Bafang 500C-H 32mm 22mm round stem mount
Added 22mm version.
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSchlegelino
44mm 16 Tooth Bafang BB tool Chaintool
a BB Tool for Bafang Motors
- Pobrania
- 33
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKophi
Lunacycle Bafang C961 Control Bracket
This is a bottom bracket for the Lunacycle C961 Controls. The model should be an exact replacement for the original. Category: Electronics
- Pobrania
- 31
- Polubienia
- 1
- Ocena
- 5
P
PrintablesJiK
Bafang display stem mount
Bafang display stem mount … AUTHOR bike. Use 2 zip ties for fixing. ONSHAPE
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 0
P
Printablesverticallife
bafang display holder 31.8mm handle bar
Display holder bracket for bafang bike
- Pobrania
- 28
- Polubienia
- 2
- Ocena
- 0
P
Printableswfvn
Bafang 850c P850c Display Controller Protection
When my wife got a Bafang motor installed on her bicycle, I immediately noticed the edge of the + and - buttons of the controller. They can easily be damaged because things (fabrics like scarfs, coats) can get caught behind the bottom…
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 5
P
PrintablesCrys' Livingroom Workbench
Bafang / Lekker Amsterdam+ battery plug cover
Cover for the battery plug of the Lekker Bikes Amsterdam+, most likely compatible with a wide range of Bafang batteries. When left outside without the battery the plug fills with rain water, not ideal. The cover prevents water from…
- Pobrania
- 23
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAnimalector
Bafang 241 display adapter for 35mm bar
a small adapter to allow fitting of the Bafang 241 Display to a 35mm bar. Category: Sport & Outdoors
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKarol Václavík
Bafang M500 Chain protector
I had a problem on my bike when my chain from time to time fell off during landings. So I have utilized mounting holes on my Bafang M500 engine to design a simple chain protector. It is held in place by 2 M4x12 screws. I have printed it…
- Pobrania
- 21
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDrainth
Bafang electrical bike battery plugholder replacement
Replacement part for electrical bike that uses a bafang battery. The part that holded the plug broke when sliding the battery in/out of the bike. The break occured at the red line on the picture of the original. To mount this replacement…
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
PrintablesZoemaestra
Bafang 800S E-Bike Display zip tie mount
Mount for generic 800S ebike displays on a 35mm diameter cylinder with zip ties Requires 2x M4 8mm screws and 2x zip ties. You may also want to put some rubbery tape between the bike and the mount if it slips around too much. Best printed…
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
PrintablesOxmstr
Bafang 500C-H display stem mount
A modified mount for Bafang 500C-H display. You need to punch out the stock pin and replace it with this part. My stem is 38mm by 33mm and the mount takes 2 additional M4 12–16mm screws. You don't need to insert the pin back, but if you…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJean-Philippe GEBEL
Support Bafang Capteur wheel
Support pour le capteur Bafang
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
Printablesmaarten
Bafang center shaft nut socket tool adaptor for BBS01 BBS02
I bought the nut removal tool and needed to put it on a torque wrench. I orderd the tool on alieexpress: https://nl.aliexpress.com/item/1005007179459286.html Print it with 10 walls. It will be totally filled and plenty strong
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
Printablessteveprusa1502
Bafang Brake sensor mount for Shimano Deore Hydraulic brakes
Mounting plate for Bafang hydraulic brake sensor modules to Shimano Deore brakes. Screws onto the handlebar mounting bolt so maintains its position better than cable ties alone to the irregular shaped brake reservoir/cylinder body. Use a…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFlorent Berthet
Support for bafang brake sensor onto shimano lever
Allow to assemble easily the bafang sensor onto a shimano hydraulic lever.
- Pobrania
- 15
- Polubienia
- 5
- Ocena
- 5
P
Printablespietjepuk
Bafang C961 Display raiser spacer
Display spacer for the Bafang C961 Display to raise the display when the head stem is in the way.
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
Printablesfroz
Bafang Ultra Slim Shark eBike Battery Cover
This is a cover for the battery contacts of the Bafang Ultra Slim Shark eBike Battery assembly when you take out the battery. Reposted from my own thingiverse post!
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printablesironiefalke
Sensoradapter Bafang Motor
Um den Geschwindigkeitssensor am HP Gekko oder Scorpion mit 20" Hinterrad etwas dichter an den Speichenmagneten zu bringen habe ich diesen Adapter entworfen. Der Adapter passt saugend auf die beiden Gewindebuchsen am 20" Hinterbau und…
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJakub308
Držák ovladače pro displej a motor Bafang
Náhrada za často praskající drzžák ovladače displeje a motoru Bafang pro průměr řídítek 22,2 mm: Z ovladače je potřeba odstranit starý držák tak, aby šel zasadit do nového viz. foto. Pro montáž je potřeba: 2x teplem zalisovávací vložku M4…
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
Printableslochej
Bafang BBS01 52T chain guard
Here is a hub 52T gear chain guard. Use M3 insert and washer+m3 bolt to install it on the hub. The hub assembly screws are accessible for easy disassembly, you can install the chain guard before mounting the gear or after. Your choice :)…
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAnka
Bafang 850c P850c display controller buttons replacements
The buttons of my ebike bafang kit finally broke, as a result I made this design to fix it. Design on Solvespace.
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesĽubomir Šmihula
Bafang BBS 01 ochranný kryt
Kryt je určený na elektromotor Bafaang BBS 01. Jazdím na bicykli celoročne a hlavne v zimnom období strieka sneh a soľ na elektromotor, čo mu neprospieva. Skladá sa z dvoch častí, ktoré sa do seba zasunú. Tento kryt sa dá ľahko bez…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesUtschke
Abdeckung für Bafang E-Bike Display / Cover for Bafang Display
Schutzhaube für das Bafang DPC-10 Display. Bitte in einer hellen Farbe drucken, damit eine Erwärmung durch die Sonne gemildert wird. Protective cover for the Bafang DPC-10 display. Please print it in a light color to help reduce heat…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesR3NE07
Bafang BBS01/BBS02 Grommets
Printed from TPU, 0.4mm Nozzle, 0.16mm Layerheight They are a lil loose & need to be sealed with silicone CAD files at onshape
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
P
PrintablesR3NE07
Bafang BBS01/BBS02 Gasket Mold
Made these simple molds to make silicone gaskets, but ended up just printing TPU gaskets since that seems to be the better material. Mold A is meant to be filled with silicone and just pressed into Mold B. Very simple. Very human design.
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
Printables
bike light holder for Bafang
Bicycle light holder for Bafang Light: https://vi.aliexpress.com/item/1005001688558602.html?spm=a2g0o.order_list.order_list_main.27.21ef18021SdWlL&gatewayAdapt=glo2vnm