1 / 4
Keyboard Case for BT75 or similar 75% Keyboards
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A keyboard case for the BT75 that should be compagible with others. Slanted and includes a place for the battery.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 532
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom made keyboard case specifically for the Polarity Works BT75. It has a slightly slanted profile and a “slot” for the originl battery. Due to its simple nature it should be compatible with many other 75% keyboards - the deciding factor is likely to be the usb-c port placement. I printed this case in two pieces (cut set in the slicer) and it works for me. The standoffs can be drilled into to make a thread for the screws. Any appropriately sized screw should work.