AstroHopper Stand for Hadley Telescope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This can be used to hold a mobile-phone stand for using AstroHopper on a Hadley telescope by @Maff
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 749
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This can be used to hold a mobile-phone stand for using AstroHopper. AstroHopper (https://artyom-beilis.github.io/astrohopper.html) needs the mobile phone to be parallel to the telescope. The holes are suited for 13mm rod/tube. I took the test print from the original Hadley by @Maff and added the stand. ½” rod/tube should also work fine. The size of the screw/nut, that holds the stand to the rod, I have tested with is 5/32”. 3/16” can be a tight fit. Phone-stand screw size is ¼” diameter (#14). I believe this is a common size for tripod mounts. The phone mount/holder I’m using is similar to this one: https://www.amazon.com/dp/B0CZ79DNSC/
There is enough clearance between the base and the rod to fit a screw with any head size. Recommended print settings: 0.4mm nozzle with 0.2mm layer height.