AstroHopper Stand for Hadley Telescope
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This can be used to hold a mobile-phone stand for using AstroHopper on a Hadley telescope by @Maff
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 53
- Makes
- 0
- Views
- 751
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This can be used to hold a mobile-phone stand for using AstroHopper. AstroHopper (https://artyom-beilis.github.io/astrohopper.html) needs the mobile phone to be parallel to the telescope. The holes are suited for 13mm rod/tube. I took the test print from the original Hadley by @Maff and added the stand. ½” rod/tube should also work fine. The size of the screw/nut, that holds the stand to the rod, I have tested with is 5/32”. 3/16” can be a tight fit. Phone-stand screw size is ¼” diameter (#14). I believe this is a common size for tripod mounts. The phone mount/holder I’m using is similar to this one: https://www.amazon.com/dp/B0CZ79DNSC/
There is enough clearance between the base and the rod to fit a screw with any head size. Recommended print settings: 0.4mm nozzle with 0.2mm layer height.