1 / 1
Scaffolding tube cap for 27mm tube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scaffoling tube caps can be quite expensive. This is a design for a 27mm scaffolding tube.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 193
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (10)Powiązane
Scaffolding tube cap for a tube with on outside diameter of 27mm.
Printed with black PETG. (which is more impact resistant than PLA).
Nozzle temperature 250℃, bed temperature 75℃.
No supports needed.
The 3MF file contains special settings to improve robustness, for example extra horizontal shells, slower speed for the bottom layer, etc.
Unfortunately, the scaffolding tubes have some variation in their inner diameter, and you may have to adjust the cap accordingly.