DJI FPV System Air Unit Mount for Nano Talon Evo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount is designed to allow the DJI Digital FPV system Air Unit to be mounted under the front hatch of the ZOHD…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 1274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This mount is designed to allow the DJI Digital FPV system Air Unit to be mounted under the front hatch of the ZOHD Nano Talon Evo. It is intended to sit under/behind the naca duct and provide some space for good airflow to cool the Air Unit. I presume it would also work with the original Nano Talon, but I don't have one to test. It should really work for just about any aircraft with a flat interior surface to glue the base plate to.
The base plate should be glued to the under side of the hatch, and 4 x M3x20mm screws are used to secure the bracket in position. The bracket part includes tabs to hold the MMCX connectors in place so they can't come unplugged in transit (or when you have a rough landing).
There are 2 versions of the base plate, one requires 3x5mm brass M3 threaded inserts, for when you intend to remove the Air Unit regularly, and one with the holes sized to allow the M3 screws to make their own threads directly into the plastic.
Print instructions
Category: R/C Vehicles