Dillon Case Feeder to Spring Tube to Lee Tube Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to connect your Dillon case feeder to the Lee APP, Pro 6000, and probably more.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 925
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted to connect my Dillon case feeder to my Lee 6 Pack Pro and APP. For some reason, the only adapters I could find were $45 on Ebay, which is absurd.
There are 4 major components:
- Dillon case feeder to spring tube adapter.
- A spring tube. Can get one off AliExpress or something.
- Spring tube to Lee tube adapter.
- Lee tube that probably came with your Lee press.
There are two spring tube sizes supported. 16mm is the one to get-- it will work for anything up to like .45 ACP or 6.5 Creedmoor or whatever.
14mm is also supported since it's what I had on hand initially, but it will not fit .45 ACP, etc.
Also included is an optional flange to mount the case feeder to the bench with a 1" wooden dowel from Home Depot or something.
Recommended print settings for the adapters:
- 0.12mm layer height
- 2 walls
- 15% infill
Recommended print settings for the flange:
- 0.2mm layer height
- 4 walls
- 25% infill
Video: